User manual POLAROID PLA-4260MTR

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong is provided for your safety. [. . . ] DVI VIDEO INPUT CABLE terminal (WHITE) 7. POWER switch Shown with optional Extension Speaker Cabinet & Display Stand. (Sold Separately. ) 8 LED Indicators Plasma Display LED indicator STATUS Off Off Off Red Condition AC power off Standby Description The AC power is off The power LED lights up in red to indicate standby mode when AC power is on. Off Flash Standby to on Only lights when power switches from standby to on mode. On The indicator on the Plasma Display lights up blue to indicate on mode. Off Blue Flash Blue DVI connector The video cable to the DVI conne error on the Plasma Display is not connected properly. Shown with optional Extension Speaker Cabinet & Display Stand. (Sold Separately. ) 9 Remote Control Button labels Functions PWR Digits 0 - 9 GUIDE/WIDE SELECT Turns on the power to the Plasma Display or places it into standby mode Access to main input #0~9 directly Select aspect ratio Select an OSD option when the OSD is active Up/down/left/right arrows Navigate up/down/left/right in the OSD INFO MENU DVI LED indicator Indicate input formation in use View the on-screen-display (OSD) Select DVI input Lights red while a button is pressed NOTE: This is a universal remote control unit. Buttons not described here do not have a function in this application 10 Installing the Plasma Display Locating · · Avoid direct sunlight. Because the Plasma Display is heavy, be sure to have someone to help you when moving or mounting it. Note Allow enough space around the upper and back parts when installing to ensure ventilation around the backside of the Plasma Display. Preparation Connecting the PDP and the video input source: · · Connect the video input source to the DVI terminal on the PDP. See the manuals for your video input source for correct operation. Basic Operation Turning on the power · Check that the AC switches on the back of the PDP and video input source are turned ON. The power LED on PDP lights up in red to indicate standby mode. Press PWR on the remote control unit or STANDYBY/ON on the right side of Plasma Display to turn the system on. The POWER ON indicator on the Plasma Display lights up blue. · Turning off the power Press PWR button on the remote control or STANDBY/ON button on the right side of the PDP. The power LED on the PDP will turn red to indicate standby mode. CAUTION Before disconnecting any system cables, turn the PDP off (put into Standby Mode) and turn the AC switch to "0". Note If the PDP is not to be used for a long period of time, unplug the AC cord from the wall outlet. 11 Basic Operation Using the Remote Control Use the remote control unit by pointing it towards the remote sensor window. Objects between the remote control unit and sensor window may prevent proper operation. Inserting batteries Install batteries in the remote control unit before using: 1. Insert the two AA size batteries supplied with the product. Place batteries with their terminals corresponding to the (+) and (-) indicators in the battery compartment. Close the battery cover. Cautions regarding the remote control unit: · Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. Do not leave the remote control unit under direct sunlight. [. . . ] Press / to select "PC" source, and then press SELECT. . Possible Solution Make sure the power cord is connected securely. Turn off AC power of the PDP and the video input source and turn on again. Cannot see any information on the display (OSD and video) and the power LED is blue. No color. Press MODE to select the desired Picture Mode. [. . . ]