User manual POLAROID PMID705X

[. . . ] Press the Power Button and Insert a MicroSD card and follow Steps 1 & 2. Turn on the camera Choose a resolution quality by switching the HD/D1 Switch to HD for 1280x720 lines or D1 for 848x480 lines (D1 provides lower resolution and smaller video files allowing for longer recording times per megabyte of storage. Press the Video Button once; the camera will begin recording video and the Status Indicator will flash slowly. To stop recording, press the Video Button the video clip will be saved to the memory card and the Status Indicator will turn off. [. . . ] To take a still picture, press the Photo Button. The Status Indicator will flash once; the photo is recorded. The photo will be saved as a “. Photos (and videos) can only be viewed through the use of a USB connection to a PC. To transfer recorded files to your PC for viewing or saving, connect the camera to the computer using the provided USB Cable connected between the camera and an available USB port on your computer. Your camera will become an external drive and will be assigned a drive letter by the computer. Once recognized by your computer, you can copy and paste files to the folder of your choice and/or delete files. You can also start your favorite video editing or photo retouching program and open the files in those programs. Time Stamp 1 The date and time can be recorded at the bottom of your videos and photos; connect the camera to your computer and turn the camera on. You may also check with your local recycling facility to determine their data sanitization procedures during the recycling process. 2cm Inserting Micro SD Package Contents • • • • Camera Waterproof case Camera back adapter USB cable • • • • Neck strap Arm/head strap Bike Mount Cleaning Cloth • • Lens Cover Manual Video Recording 1 2 3 4 1 2 3 4 1 2 3 Warning & Cautions • • • • • • • • If foreign objects or water enter the camera, turn the power off. If the camera has been dropped or its case has been damaged, turn the power off. continued use may cause permanent damage and/or personal injury. There are no user serviceable parts in the camera: DO NOT DISASSEMBLE!Do not place the camera on unstable surfaces. This may cause the camera to fall or tilt over, causing damage. Do not drop, strike, or use excessive force when handling the camera. Doing so may render the camera inoperative. [. . . ] Doing so may render the camera inoperative. Do not leave the camera in places where the temperature may rise significantly such as inside a car. High temperatures may adversely affect the case or internal parts of the camera. Before you move the camera, disconnect cords and cables. [. . . ]