User manual POLAROID POLAVIEW 305 PROJECTOR

[. . . ] Polaview 305 Projector User Guide FCC Statement Warning: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class "A" computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user, at his own expense, will be required to take whatever measures may be necessary to correct the interference. Canadian Notice This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique edicté par le ministère des Communications du Canada. European Notice Warning: This is a Class A product. [. . . ] Press the SCALE key a second time to return the image to its original size. To pan an image that does not fit on the screen (images larger than 1024 x 768), press the arrow keys on the projector control panel. Note: You can set the top and left pan limits by adjusting the Advanced, Horiz. (vertical) settings in the projector menus. Advanced features The Polaview Model 305 Projector offers several advanced features to enhance your presentations. For example, you can program two keys on the remote control, assigning them specific functions. You can also save setting profiles, allowing two presenters that use the same projector to save customized settings. Programming the remote control You can program two keys on the remote control, PROG 1 and PROG 2, to execute commonly-used functions or to gain access to a setting that you frequently need to adjust. To program the PROG 1 and PROG 2 keys, open the projector menus and choose Preferences. Choose the key you want to program (PROG 1 or PROG 2) and assign the function or setting you want to use. Note: If you want to assign one of the Polaroid F/X effects to one of the programmable keys, you must select Host in the Preferences menu. 60 Using the projector Saving a user profile The Polaview Model 305 Projector permits two presenters to save their settings and recall them each time they give presentations. To save current video settings as a profile, open the projector menus and choose Advanced, User. Then select User A or User B, and adjust each setting you want to save. By exiting the projector menus, you save your settings as a profile. Note: You cannot save sense-line and front/rear settings as part of the profile. Sense-line settings are automatically set when you turn on the monitor that is connected to the projector. When you want to use your profile, open the projector menus and choose Advanced, User then select your profile (User A or User B). The settings take effect immediately. Using the projector 61 Menus and keys The Main menu Menus Tools Cyclops Input Source Image Audio Projector Preferences Advanced Menu What it contains Tools Settings for the Draw tool, Break Timer, and mouse tracking. Commands for calibrating the Cyclops interactive pointer system and button selection. Settings for computer video, S-video and Adobe Acrobat Player System input sources, and a display-only screen of current VSync, HSync, Lines, and Sense measurements. Settings for brightness, sync, tint, saturation, contrast, color, dot clock, and interlace assignment. Settings for volume, mute, balance, bass, treble, fade, microphone volume, and mono/stereo modes. Settings for front/rear projection and the lamp-hours counter. Cyclops Input Source Image Audio Projector 62 Using the projector Menu What it contains Preferences Settings for colors, language, on-screen indicators, and Program key functionality. Also contains the settings for projecting in reverse video for DOS screens. [. . . ] 5 Set Sense 3, Sense 2, Sense 1 and Sense 0 to the settings recommended for your system. 122 Appendix C 6 Exit the menus and restart your computer (do not turn off the projector). Macintosh displays The next table shows typical sense-line settings for Macintosh systems, based on the system resolution. Try these settings only if you have trouble projecting an image without an external monitor connected to the computer. Remember to restart your computer after you make these changes. Display resolution Sense-line setting(s) 640 x 480 Sense 3: High Sense 2: High Sense 1: High Sense 0: Low Sense 3: High Sense 2: Low Sense 1: Low Sense 0: Low Your system needs a Macintosh terminator. Try the Macintosh Sync Adapter (02-20-UNV) available from Griffen Communications Corp. , 1451 Elm Hill Pike, Park Elm Bldg, Suite 100, Nashville TN 37210 (615) 399-0990 fax: (615) 399-7060. 1152 x 870 832 x 624 and 1024 x 768 Identifying sense-line settings To determine the current sense-line setting: 1 Connect the projector to the computer and the monitor. [. . . ]