User manual POLAROID PORTABLE DVD DOCKING STATION

[. . . ] Docking Station User's Manual 20060523 Table of Contents Important Safety Instruction-------------------------------------------- 3 Accessories----------------------------------------------------------------5 Features ---------------------------------------------------------------------- 6 Front View ------------------------------------------------------------------- 7 Display Panel----------------------------------------------------------------- 8 Rear Panel & Side Panel---------------------------------------------------- 9 Remote Control ----------------------------------------------------------- 10 Attaching & Detaching Portable DVD player---------------------- 13 System Connections----------------------------------------------------------- 14 TV Setup -------------------------------------------------------------------------- 17 AV Setup -------------------------------------------------------------------------- 21 Troubleshooting ------------------------------------------------------------- 24 Specifications ---------------------------------------------------------------- 25 -2- Important Safety Instruction The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION 1. The product contains a low-power laser device. In order to ensure the safety of the laser device, do not remove any cover and attempt to repair the unit. [. . . ] Or press to adjust the value of time when setting time on the display panel. MENU button Press to access the menu of current mode. CH +/Press to select channels in TV mode. MUTE button Press to mute off the speakers output. 0-9 number buttons Select numbers by pressing these buttons. One-digit number: press the number button and press the ENT button or wait 2 seconds to confirm. Two-digit number: press the first number and input the second number in 2 seconds. Three-digit number: press the first number, then input the second number in 2 seconds, and input the third number in the next 2 seconds. CH DISP In TV mode, display the current channel information. P-MODE button Press to change the picture modes: Bright, Soft or Nature. LAST button Press to back the last channel that you watch in TV mode. 16:9/4:3 button Press to change the screen aspect ratio between 16:9 and 4:3. VOL-/+ button Press to adjust the volume. 7. 16. Note: When the portable DVD player is connected to the docking station, the mute button on the docking station remote control mutes the docking station only. If you want to turn off the volume of the portable DVD player, adjust the volume control on the portable DVD player to its minimum volume level. - 12 - Attaching & Detaching Portable DVD player Note: Do not connect the power cord until all other connections have been made. Attaching Portable DVD player to Docking Station Follow the steps below to attach the portable DVD player to the Docking Station. It is advised to attach the rechargeable battery to the portable DVD player before this connection. Step1: Center the player on the Docking Station and line up the 4 slots on the bottom of the player with the 4 fixing hooks on the Docking Station. Step2: Press the portable DVD player down gently with two hands and the fixing hooks will fix the portable DVD player on the Docking station from moving. Detaching Portable DVD player from Docking Station Step1: Slide the two release buttons toward the front of the Docking Station to unlock the fixing hooks. The five spring tabs will spring the portable DVD player up. Step2: Remove the portable DVD player from Docking Station. System Connections - 13 - · · Do not connect the power cord until all other connections have been made. Ensure that you observe the color cord when connecting audio and video cables. Expand the Connections The following drawing shows a sample of expanding the connections of a portable DVD player with Docking Station: After connecting with external AV source by AV jacks, please turn on the power of the unit and press the SOURCE button on the front panel to shift to AV1 mode, or press the AV1 button on the remote control to shift the mode directly. If the AV source is from docking station, please press the SOURCE button on the front panel to shift to AV2 mode, or, press the AV2 button on the remote control to shift the mode directly. System Connections - 14 - Connecting to TV Signal Input Source The unit can be connected to a TV antenna to receive TV programs. [. . . ] Press the direction buttons to shift between AM and PM. When the playback of the signal source is over, the player will enter standby mode. Press the ENT button to confirm. - 22 - AV Setup Alarm To set the alarm time, use number buttons to input the desired start time in sequence of hour, minute. Press the direction buttons to shift between AM and PM. [. . . ]