User manual POLAROID T-879 FILM DATA SHEET

[. . . ] Film Data Sheet T-879 8 x 10 Sheet Film Description 3URIHVVLRQDO &RORU 6KHHW )LOP [ LQFK [ FP 7\SH ILOP Medium-speed, medium-contrast, medium-grain, daylight and electronic flash balanced (5500°K) color print film. This film features accurate colors and bright whites; sharp, vibrant, saturated proofs and final art; lower contrast for greater detail when compared to Polaroid Pro 100 film; improved reciprocity characteristics, and fast clearing and drying. Key Applications · Professional photography proofing (strobe or short exposures only) · Final art · Test shots · Large-format copystand photography · Evidence documentation · Photographic souvenirs · Large-format photomicrography · Materials and quality control documentation · Special events photography Film Speed ISO 100/DIN 21 Format 8 x 10 in. [. . . ] If you get some paste on your skin, wipe it off immediately, then wash with water to avoid an alkali burn. If eye contact occurs, quickly wash the area with plenty of water and see a doctor. Keep discarded materials away from children, animals, clothing and furniture. Alternative Product Use Polacolor 809 for emulsion lift Processing Information Temperature °F °C Proc. Time (sec. ) Equivalent Film Speed (ISO/DIN) Exposure Adjustment None None None None 70-95 65-69 61-64 55-60 21-35 18-20 16-17 13-15 90 120 150 180 100/21 100/21 100/21 100/21 Limited Warranty See information on the film box. "Polaroid" and "Polacolor" are trademarks of Polaroid Corporation, Waltham, MA 02451 USA. Film Data Sheet Technical Data T-579, T-679, & T-879 Instant Color Peel-Apart Films The information in this data sheet represents the typical performance of Polaroid's T-679, T-579 and T-879 color films. Specific film lots may vary. Characteristic H&D curves for normal development 3 H&D Curves @ 70oF/21oC Blue Green Recommended speed: ISO/DIN 100/21o 2 Sample Density Red Recommended processing time and temperature: 90 seconds at 70o -95o F (21o-35oC) Balance: Daylight and electronic flash (5500oK) Contrast: Medium 1 0 -3 -2 Relative Log Exposure -1 0 D-Max: The density value for the film's darkest black. D-Min: The lowest density value that a film exhibits. In prints, the whiteness of the brightest highlight, relative to the unprocessed print. Slope: The positive ratio of the log E increments of the straight line region of the curve, as determined by the 1/4-3/4 increment method. The slope of an H&D curve indicates the overall contrast of a film: low contrast slopes less than 1. 10; medium contrast slopes from 1. 10 to 1. 70; high contrast slopes greater than 1. 70. At 71o F/21o C: D-Max = 1. 8 D-Min = . 16 Slope = 1. 30 Characteristic H&D curves for cold development 3 H&D Curves @ 55oF/18oC Blue Green Red Sample Density 2 Sample Density 2 3 Characteristic H&D curves for hot development H&D Curves @ 95oF/35oC Blue Green Red 1 1 0 -3 -2 -1 Relative Log Exposure 0 0 -3 -2 -1 Relative Log Exposure 0 Film Data Sheet Technical Data T-579, T-679, & T-879 Instant Color Peel-Apart Films Spectral Sensitivity 40 Blue Green Reciprocity Law Failure Blue 2 Green Red 30 35 Relative Log Exposure Red Spectral Sensitivity 10 15 20 25 5 0 0 . 0001" 0. 4 0. 8 1. 2 1. 6 350 400 450 500 550 600 650 . 001" . 01" . 1" 1 10" 1 Wavelength (nm) Exposure Time (seconds) Action Sensitivity 1. 5 Blue Green Red Reciprocity: The ability of the film to respond in a constant manner to a constant exposure (light intensity x time ). Reciprocity failure occurs during very long or very short exposures, requiring the photographer to increase exposure. [. . . ] The recommended filters require the following exposure changes: cc 5m - none, cc 10m + 1/3, and cc 20m + 2/3. Filter Recommendations Color Temp ( K) 2800oK o Exposure 1/8 sec 1 sec. 15 sec. Filtration 80A + 5M 80A + 20M 80A + 30M 80A + 40M 80A 80A + 10M 80A + 20M 80A + 30M Effective ISO (approx. ) 32 25 20 16 32 25 20 16 3200 K o 1/8 sec. [. . . ]