User manual POLAROID TDM-1311

[. . . ] Important Safyguards Important Safety Precautions This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. AU C AU T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. This symbol indicates This symbol indicates "dangerous voltimportant instructions age" inside the product that presents a accompanying the risk of electric shock or personal injury. [. . . ] These regional codes must be matched accordingly for the loaded disc or it may fail to play back. The regional code for this unit is Region 1. Loading and Playing Discs DVD disc, audio CD disc and recorded CD-R/CD-RW discs are playable for this DVD player. Before the playback, make sure the discs are compatible with this DVD player. Press the DVD button on the remote control or INPUT button on the main unit(or on the remote control) to turn on the DVD player. Press the OPEN/CLOSE button on the main unit (or on the remote control) to open the disc tray. Place a disc gently into the tray with the disc's label facing up. Press the OPEN/CLOSE button on the main unit (or on the remote control) to close the disc tray. Press the PLAY button on the main unit (or on the remote control) to start the disc playback and display the disc menu. When the disc menu appears, select your desired option and press the OK button on the remote control to start playback. The DVD player reads the disc's table of contents, and then one of two things happens depending on how the disc was programmed: . One of the options will start disc play. Highlight that option and press OK on the remote control. 9 Using the Menu System TV Function Menu Menu basic operation 1. Press the MENU button on the main unit (or on the remote control) to enter menu mode. Press the VOL / button on the main unit ( or / button on the remote control) to select the icon. Press CH / button on the main unit (or / button on the remote control to select your desired mode. Press the VOL / button on the main unit (or / button on the remote control) to change the setting. CLOSE CAPION Eight closed caption modes, including four text modes. CC ON MUTE To display close caption automatically when the MUTE button is pressed with the unit turned on. Note: The BACK GROUND function is not available when the unit is in RF input mode. 11 Using the Menu System Using the TUNING menu The TUNING menu is used to tune the channel. To select AIR source to receive radio broadcast frequency. To select CABLE source to receive CATV channel. CHANNEL Use the VOL / button on the remote (or the VOL / button on the front of the TV) to scroll through the channels available. [. . . ] Check if the power switch is in "on" position. Check if the batteries are out of use or not connected well. To make sure that there is no strong light strikes the sensor window of remote control unit. Check there are no obstacles before the sensor window of remote control unit. [. . . ]