User manual POLAROID TLU-02041

[. . . ] HD-Ready Widescreen LCD TV with Digital Tuner Your TV may look different from the one pictured above. Questions?Need some help? This manual should help you understand your new product. If you have questions, call our free-phone number found on the insert with this icon: Or visit www. polaroid. com. ©2007 by . All rights reserved. "Polaroid" and "Polaroid and Pixel" are trademarks of Polaroid Corporation. [. . . ] When connecting any external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting a TV Cable or an Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems. A 75-ohm system is generally a round cable (not included) with IECtype connector that can easily be attached to a terminal without tools. IEC-type connector 75-ohm coaxial cable (round) A 300-ohm system is a flat twin-lead cable (not included) that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not included). 300-ohm twin-lead cable (flat) 13 Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A: Shows how to use a VHF/UHF combination outdoor antenna. B: Shows how to use a separate VHF and/or UHF outdoor antenna. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF Antenna 300-ohm twinlead cable 75-ohm coaxial cable B. Separate VHF and/or UHF antennas UHF Antenna Combiner 300-ohm twin(not included) lead cable OUT IN 75-ohm coaxial cable 300-ohm twinlead cable VHF Antenna 14 Chapter 2 Installing the LCD TV Cable TV (CATV) Connection A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75ohm cable into the ANT. Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. ENGLISH This converter/descrambler is necessary for normal viewing of scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company. ) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of connecting the converter/descrambler provided by your cable TV company is shown in the diagram below. RF switch (not included) OUT A IN B 2 set signal splitter (not included) Cable TV Line VHF/UHF IN Cable TV converter/ descrambler (not included) The RF switch (not included) is required to provide two inputs (A and B). Setting the RF switch to position A allows viewing of all unscrambled channels by using the TV channel keys. Setting the RF switch to position B allows viewing of all scrambled channels via the converter/descrambler by using the converter channel keys. 15 Chapter 2 Installing the LCD TV Use an antenna cable to connect the ATV/DTV signal to the LCD TV's ANT. terminal. VHF/UHF IN Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Turn the POWER SWITCH of rear TV on. Press the button on the remote control to turn on the LCD TV. Always disconnect the LCD TV from the power outlet when the LCD TV will not be used for a long period of time. The POWER button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket. The 1st time installation screen will automatically tune both ATV and DTV signals on initial turn on. Make sure an aerial is fitted, then press the symbol OK button on the remote to start the Auto Programme Scan (APS). First ATV will auto tune and auto sort then DTV will automatically follow. Region Confirm C Language Country APS English UK Is the aerial plugged in!Press OK to start APS. Move Select Exit 16 Chapter 2 Installing the LCD TV 2. [. . . ] Use buttons to select "NEW", the new channels will be replaced the previous channels in the channel list. Channel Installaion(manual): Allows to create channels manually. New Detected Channels: Press OK to display the New Detected Channels menu, shows the channels that you add in the channels list recently. 42 Chapter 4 Using the DTV Features System Parameters Press the buttons to highlight the System Parameters and press OK to display the menu: System Parameters ENGLISH System Information Factory Reset System Upgrade System Information: Press OK to display the system information menu Factory Reset: Use to select "Yes" and press OK to restore factory Reset. System Upgrade: Press OK to upgrade system. Signal Information Press the buttons to highlight the Signal Information and press OK to display the menu. [. . . ]