User manual POLAROID TTM-2004

[. . . ] A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. [. . . ] Use the VOL / button to change the setting. Press MENU button to return the last menu. 7 External connection CONNECTING TO AC POWER SUPPLY Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a polarized AC outlet. AC Outlet Polarized AC Plug NOTE: If the polarized AC plug does not fit into a nonpolarized AC outlet, do not attempt to fix or cut the blade of the plug. It is the user's responsibility to have an electrician replace the obsolete outlet. Connecting Antenna to TV Choose the type of antenna hook-up style (A, B, C or D) that resembles your antenna. Connect directly to the TV's 75 Input terminal as shown in the style you selected. Style A UHF/VHF OUTDOOR 300 TO 75 MIXER/ ADAPTER (Not supplied) 75 TERMINAL Style B COMBINATION UHF/VHF OUTDOOR 300 TO 75 ADAPTER (Not supplied) 75 TERMINAL Style C COMBINATION UHF/VHF OUTDOOR 75 ANTENNA LEAD IN CABLE 75 TERMINAL Style D TELESCOPIC INDOOR ANTENNA AND ADAPTER 75 TERMINAL BACK OF TV BACK OF TV BACK OF TV BACK OF TV NOTE: TV will enter standby mode automatically after 10 minutes if a signal is not being received. Connecting Cable (CATV ) to TV Cable Service Connect Cable directly to the TV's 75 input terminal Using a Cable Box Connect Cable to Cable Box "In" terminal, then connect the Cable Box "Out" terminal directly to the 75 input terminal on your TV. NOTE: Tune your TV to match the output channel of the box (such as channel 3 or 4). CABLE 75 INPUT TERMINAL 75 INPUT TERMINAL IN OUT CABLE BOX BACK OF TV BACK OF TV 8 External connection Connecting an Antenna or Cable System to VCR and TV Antenna Choose your antenna hook-up style A, B or C and connect to "IN FROM ANT. " on the VCR. Connect cable from "OUT TO TV" on VCR directly to the 75 input terminal on your TV. STYLE A STYLE B STYLE C 75 TERMINAL BACK OF VCR IN OUT BACK TV PANEL Cable Service Connect cable directly to "IN FROM ANT" on VCR . (If using a cable box, connect cable to input on box. Connect cable from output on box to "IN FROM ANT" on VCR . ) Connect cable from "OUT TO TV" on VCR directly to the 75 input terminal on your TV. NOTE: Tune your TV to match the output channel on the cable box and VCR (such as Channel 3 or 4). CABLE IN OUT BACK OF CABLE BOX 75 TERMINAL BACK OF VCR IN OUT BACK TV PANEL 9 Using the PICTURE menu Using the SETUP menu CONTRAST BRIGHT COLOR TINT SHARPNESS Adjust left to decrease picture contrast. Adjust right to increase picture contrast. Adjust left to decrease color intensity or saturation. Adjust right to increase color intensity or saturation. Adjust left to soften the picture detail. Adjust right to sharpen the picture detail. 10 Using the P. LOCK menu Using the SETUP menu (continued) Figure 1 Note: 1. When you enter P. LOCK submenu first time, red "NEW CODE" will display on the menu, input four-digit numbers as your password by pressing 0-9 buttons. After you input the numbers, blue "ENTER CODE" will display on the menu, input again the password you have set to enter P. LOCK submenu, the submenu will display as the following: Figure 2 2. If you have set your password, when you want to enter P. LOCK submenu, the menu will display blue "ENTER CODE" shown as figure 1, input your password to enter the submenu shown as figure 2. If you need to modify your password, first enter the submenu shown as figure 1, then press CODE button on the remote control, the "OLD CODE" will display in red on the menu; Input your old password, then "NEW CODE" will display in red on the menu, input four-digit numbers as your new password. "ENTER CODE" will display in blue on the menu, input your new password to enter the submenu shown as figure 2. If you forget your password, input 4769 to enter the submenu and renew your password. 3. CH LOCK Select this item to enter CH LOCK submenu (as shown). [. . . ] Station or CATV experiencing problems; tune to another station. Station or CATV system problems; try another station. Check antenna connections and reorient antenna. Check for source of possible interference. [. . . ]