User manual POLAROID TTM-2420

[. . . ] In case of smoke, strange noise or strange smell from the unit, switch it off, unplug it from the wall outlet and contact your dealer or service center. Unplug the apparatus from the AC outlet when it will not be used for a long period of time. And when there is a lightning, unplug the unit from the AC outlet immediately. Never touch the antenna wire during lightning. i Important Safety Precautions 4. [. . . ] Enter channel numbers and time settings directly through the remote control. To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the first digit for two seconds until two dashes appear to the right of the number, then add the second two. Example: to tune a channel 123, press and hold 1 for two seconds, press 2, then press 3. 8 Remote Control Remote control Displays channel information. Returns you to the previous channel. If the user is in the menu system, Go Back will take the user to the previous menu screen. BROWSE "Browse"feature. Pressing the button twice will begin channel scan, again will stop at current channel. PIC Steps through picture presets MEMORY, STANDARD, DYNAMIC and MILD. CLEAR Remove any menu or display form the screen and returns you to TV reviewing. For menu with digit inputs pressing CLEAR button will clear the last number entered. TV/AV Toggles the set between available AV inputs and RF input. VOL (left and right)buttons Decrease or increase the TV's volume, or move through the on-screen menu system. PROG. (up and down)buttons Scan up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels, or move through the on-screen menu system. SOUND Four preset audio settings for you to select (MEMORY/ STANDARD/NEWS/MUSIC). STEREO Four Note: For models without AV available audio modes (AUTO/MONO/STEREO/ the STEREO or BTSC, SOUND or STEREO button on SAP) remote control or turns off the colsed caption. to "SA-U" series CCD Turns on is not activated, Please refer colour television Functions table in page 21 for your model. DISPLAY PRE. CH Loading batteries: Note: Remove the lid of the battery compartment, insert 2 size AAA batteries with the polarities as indicated inside the compartment then replace the lid. One loading of batteries will last 1 year under normal use. If you do not intend to use the remote control for a long period of time, remove the batteries to avoid damage due to leakage. 9 Basic Operation Overview Connect to the Mains Insert the mains wire plug of the unit into AC 120V mains outlet. Power on/off When you press the POWER switch button to standby or turn on TV. Note: The power indicator will turn into red when TV is under standby state. The power indicator will die when TV is under turn on state. Non-signal power-off in 5 minutes In case the unit under blue screen or non-signal screen saver state, TV will be standby state automatically 5 minutes later, to turn it on, please press POWER button on TV. Change channels You can change channels by using the PROG / PROG / button on the remote control). Volume UP/DOWN You can adjust the sound by using VOL / button on the remote control). button in front of the TV(or the button in front of the TV (or the VOL / Sleep function 1. [. . . ] Press VOL or VOL buttons on the remote control to Select the MPAA ratings. When you select a movie rating, the system will automatically block all movies with higher ratings. No Rating Provided Directed at Older Children TVPG SETTING TVPG setting. Press VOL or VOL button on the remote control to go to the Hierarchy of Age-Based Ratings TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA All Children Directed to Children 7 years and older General Audience Parental Guidance Suggested Parents Strongly Cautioned Mature Audience Only table 2 RETURN Come back the higher menu. 17 Using the FUNCTION Menu CCD Eight closed captioned modes including four text modes. Provide nine states: (OFF, C1, C2, C3, C4, T1. T2, T3, T4). [. . . ]