User manual POLAROID TTX-141

[. . . ] Since 1937, America has turned to Polaroid for their photography needs. Today, families look to Polaroid for consumer electronics that define the digital age: plasma and LCD TVs, portable and standard DVD players, digital cameras. And while our selection has changed, you'll still receive the same friendly, helpful service that made Polaroid an American icon. Congratulations on your new Polaroid TV purchase. [. . . ] Changing channels Change channels by using the CHAN / button on the television or on the remote control. When ANTENNA is set to AIR, access the channel by pressing two digits on the remote control. When ANTENNA is set as CABLE, use three digits on the remote control to select the channel. To select channels above 100, press and hold the "1" number for two seconds. The OSD shows 1--, then input the other two digits. Turning the volume up or down Adjust the sound by using the VOL / button on the television or on the remote control. 6 External connection This unit can be simultaneously connected to a VCR, DVD player, video camera and other audio-video equipment . For monophonic audio devices, connect the audio using the AUDIO L jack. Under AV1, AV2 mode, connect the external equipment to the back panel of this television as shown in the following figure: YELLOW(VIDEO) WHITE(AUDIO) RED(AUDIO) 2. Under AV3 mode, connect the external equipment to the side panel of this unit as the following figure shows: Video input Audio input (L MONO) Audio input (R) 7 General description Menu operation instruction Menu basic operation 1. To enter a menu, press the menu button on the television or on the remote control, then use the VOL / button on front of the television (or the / button on the remote control) to select the icon. Press CHAN / button on the television or on the remote control to select the mode you want to change. Use the VOL / button on the television or on the remote control to change the setting. Press the MENU button on the television or on the remote control to return the previous menu. You can press the CLEAR button on the remote control to exit the menu operaton directly. Using the PICTURE menu The PICTURE menu allows you to make an adjustment to your picture settings. It also allows you to customize the picture mode based on the type of program you are viewing. KKY261 N CHAN CHAN CONTRAST BRIGHTNESS COLOR SHARPNESS TINT COLOR TEMP Adjust the difference between the light and dark areas of the picture. Adjust left or right to darken or brighten the picture. Adjust left or right to decrease or increase color intensity or saturation. Adjust left or right to soften or sharpen the picture detail. Adjust the balance between the red and green levels. Provide three automatic color adjustments: Cold for a more blue palette of picture color; Normal; Warm for a more red palette of picture color. Using the SOUND menu The SOUND menu allows you to make adjustments to your sound settings. SOUND BASS TREBLE BALANCE SURROUND 50 50 0 OFF BASS TREBLE BALANCE SURROUND 8 Adjust left or right to decrease or increase low pitched sound. Adjust left or right to decrease or increase high pitched sound. [. . . ] You can use number buttons to input a new password. Enter the same number to confirm the new password. 13 Troubleshooting (VHF / UHF reception) The most common types of television interference are as follows: SNOWY PICTURE Snowy picture is usually due to weak signal. Adjust antenna or install an antenna amplifier. DOUBLE IMAGE OR GHOSTS Double images are usually caused by reflections from tall buildings. Adjust the direction of the antenna or raise it. RADIO WAVE INTERFERENCE Wavy patterns are moving on the screen, which are usually caused by nearby radio transmitters or shortwave receiving equipment. HIGH TEMPERATURE ELECTROTHERMAL INTERFERENCE Diagonal or herringbone patterns appear on the screen or part of picture is missing. [. . . ]