User manual POLAROID XSA-00770S

[. . . ] Do not place it in a bathroom or kitchen near a sink or where it may come in contact with water. Never place heavy or sharp objects on the LCD panel, frame, or power cord. Overloading Outlets Do not overload electrical power sources when using the Digital Picture Frame with Built-in Weather Station. Overloading wall outlets, circuits, or extension cords can result in overheating, fire, or electric shock. [. . . ] Then press the >> button to next picture or press the << button to previous picture. When viewing a picture, press the Play (II) button again to enlarge the current picture. Under zoom in state, press the >> button to move to the right side of the picture and press the << button to move to the left side. Press the EXIT button to zoom out the picture to original size. Press the EXIT button for one second to access the on screen display (OSD). Press the >> or << button to choose one item and press the Play (II) button to enter. Press the >> or << button to choose one option and press the Play (II) button to confirm your choice. Press the EXIT button to exit the OSD. ControlsUp and Navigation Set and Basic Instructions Buttons on the Remote Control SETUP button Press to open menu for changing settings. CARD SELECTION button Press to choose a different memory card. EXIT button Hold down for one second to enter the on screen display menu, press again to exit. SLIDE SHOW button Press to start/stop a photo slideshow ROTATE button Press to rotate photos 90 degrees clockwise on screen DISPLAY button Press to change from 4:3 to 16:9 and back MARK button Press to mark your favorite pictures for a slide show ZOOM button Press to zoom up to 4x ENTER button Press to confirm your slection and play still images button Press to move up when selecting files on your screen. button Press to move left when selecting files on your screen. button Press to move right when selecting files on your screen. button Press to move down when selecting files on your screen. Controls and Basic Instructions Control Button Functions All function settings for the Digital Photo Picture Frame can be controlled via the buttons located on the top of the frame. You will be able to access the on screen display (OSD) at any time, except when in Slide Show Mode, by simply holding down the "EXIT" button for one second or press remote control setup button. OSD Menus Mosaic View Image Size Slide Show Effect Sub-Menus On Off Original Optimal Off Fade Shutter Cross Comb Mask Brick Dissolve Bar Random Fast Normal Slow On Off -Are you sure?yes/no English Italian German French Spanish Portuguese Dutch Off 30 Seconds 60 Seconds 5 Minutes 15 Minutes Description Watch four pictures at a time in a slide show Display images in original aspect ratio Optimize images to fill entire space Select style of transition Slide Show Speed Speed of slide show Slide Show Shuffle Set Favorite Reset Settings Language Picture display order is random in slide show mode Set favorite pictures as Slide Show Restore settings to default values Multiple languages Auto Slide Set The slide show will automatically after the selected time. Note: If a card is inserted into the Digital Picture Frame, selecting "Start Slide Show" will run a Slide Show of images contained in the memory card. If you select some favorite pictures through "Set Favorite" option, the Slide Show will display your favorite pictures. ControlsUp and Navigation Set and Basic Instructions Control Button Functions - continued OSD Functions Note: To enter the OSD, hold the EXIT button down for one second. Note: The OK button has two functions: 1:Press it just for a second to confirm your choice 2: Press and hold it down for a longer time to enter the slide show mode. Button Command << Up / II Select >> Down EXIT Exit OSD Menu Viewing Pictures Individually Button Command << Previous Picture / II Zoom in the Select Picture >> Next Picture EXIT Press once to zoom out the picture to original size or hold down for one second to enter OSD Menu Select Mode Page / Select Card Page Button << / II >> EXIT Command Left Select Right Back to "Select Card" Page Demo Slide Show Some demo pictures have been loaded into the digital picture frame. These pictures can be viewed without inserting any memory cards. Power on the digital picture frame, wait for a while, the demo slide show will run automatically. Connecting a USB Device to the Digital Picture Frame Your Digital Picture Frame has a built-in USB port. Using a USB cable (not included) and your digital camera or a USB flash drive, you have the ability to view images directly from the USB source. Connect the AC adapter to the Digital Picture Frame and slide the power switch to the "on" position. [. . . ] The problem may be: 1) The emitter is too far from the receiver's indoor location. 2) There are more than one or two barriers between the emitter and receiver. 4) There is strong interference in the wireless signal. If the LCD still doesn't display the outdoor temperature, power off the built-in weather station and restart. [. . . ]