User manual POLK AUDIO S4

[. . . ] The openings should never be blocked by placing the products on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. This product should be operated only from the type of power source indicated on the marking labels. [. . . ] Unauthorized substitutions may result in fire, electric shock or other hazards. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the products are in proper operating condition. The appliances should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Use caution when moving the cart/apparatus combination to avoid injury from tip-over. This product is not intended for use outdoors. Polk Audio specifies the recommended amplification range for each of its passive (non-amplified) loudspeakers. typically that specification will be expressed as a range of power such as 20-200 Watts (per channel). It is important to understand what those numbers mean when choosing a receiver or amplifier for your Polk loudspeakers. The lower number indicates the lowest continuous rated power that will yield acceptable performance in a typical listening environment. One TSi floorstanding speaker, two bookshelf speakers or one center channel speaker 2. Wall Mount Template (for TSi100 bookshelf speakers only) Important Note: If anything is missing or damaged, or if your speaker fails to operate, notify Polk Audio Customer Support Services immediately at 800-377-7655. For more information visit our website at www. For more information visit our website at www. For more information visit our website at www. FIGURE 1 (TSi 500, TSi 400, TSi 300, TSi 200 & TSi 100) Create an equilateral triangle between the speakers and the listening position. If you notice video distortion or discoloration, immediately move the speakers away from the video source and call Polk Audio Customer Service 800-377-7655 (US and Canada) or polkcs@polkaudio. TSi Series Center Speakers are magnetically shielded for safe placement near TV or video monitors. If you notice video distortion or discoloration, immediately move the speakers away from the video source and call Polk Audio Customer Service 800-377-7655 (US and Canada) or polkcs@polkaudio. Carefully pry out the binding post plugs to expose banana plug holes. FIGURE 4 (TSi 500, TSi 400 & TSi 300) Bi-wiring, or using separate speaker wire connections for high and low frequency sections. [. . . ] This warranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced. This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. Be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. [. . . ]