User manual POLK AUDIO SR6500

[. . . ] start with the jumper in the "0dB" position and listen. If you want a "brighter" sound, move to the left position, "+1dB, " ("+2dB": SR5250) and listen again. WARNING: Do not operate the tweeters without crossover networks. [. . . ] We recommend using an external power amplifier that has a power rating of 50 - 150 Watts per channel to get the best possible performance. Your Polk Audio loudspeakers are made with the highest quality materials for years of trouble-free performance. However, damage to loudspeakers can occur when an amplifier, regardless of its wattage, is made to play at higher listening levels than its power can cleanly produce (usually beyond the "1 to 2 o'clock" position on the volume control). This results in very high levels of audible distortion, originating in the amplifier, which adds a harsh, gritty sound to the music. Contrary to popular belief, a speaker is more likely to be damaged by trying to get too much volume from a low-powered amplifier than from a high-powered one. Call Polk Audio's Customer Service Department at 1-800-377-7655 from 9am to 6pm, Eastern Time, Monday through Friday, or e-mail us at polkcs@polkaudio. Please do not hesitate to call us if you have questions about your speaker system. Seating The Driver & Spacer Ring: When the screw holes on the adapter ring/spacer line up with the holes INSTALLING IN FACTORY LOCATION DIAGRAM on the driver's basket, you will hear and feel them "click" into place. HOCHTÖNERHALTERUNG (KOAXIALMODUS) FIGURA 7: INSTALACIÓN Y DESMONTAJE DEL TWEETER COPA DE MONTAJE AL RAS Y BASE DE MONTAJE DEL TWEETER (MODO COAXIAL) FIGURE 7: INSTALLATION ET DÉSINSTALLATION DU TWEETER Angle Mount Installation Note: Signature Reference tweeters may be swiveled to get the best high frequency COMPONENT TWEETER ASSY response and soundstage. generally , pointing the tweeters toward the listening position will yield the best results. Use the position that sounds best to you. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party. , warrants, to the original retail purchaser only, that the LOUDSPEAKER(S), PASSIVE CROSSOVER COMPONENT(S) and ENCLOSURE on this Polk Audio Loudspeaker Product will be free from defects in material and workmanship for a period of three (3) years from the date of original retail purchase from a Polk Audio Authorized Dealer. Com/registration or call Polk Audio customer service 800-377-7655 in the USA and Canada (outside the USA: 410-358-3600) within ten (10) days of the date of original purchase. Be sure to keep your original purchase receipt. Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to the Factory at 2550 Britannia Boulevard, Suite A, San Diego, California 92154. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option, repair or replace this Product at no additional charge, except as set forth below. [. . . ] All implied warranties on this Product are limited to the duration of this expressed warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from state to state. [. . . ]