User manual POLK AUDIO VM20

[. . . ] Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] Outside the US & Canada, call 410-358-3600. More detailed information--including audio how-to articles, FAQs, and online manuals are available on our award-winning website www. With your loudspeakers you should find: VM10 · Online Registration Card Important Note: If anything is missing or damaged, or if your speaker fails to operate, notify Polk Audio Customer Support Services immediately at 800-377-7655. SPEAKER MOUNTING OPTIONAL ACCESSORIES VM10 and VM20 Floor Stands Both the VM10 and VM20 can be mounted on stands that will place them at listening height. These stands, FS10 for the VM10 and FS20 for the VM20, are optional accessories available from your authorized Polk Audio Dealer or on our website: www. Complete mounting instructions come with each stand. VM20 Table Stand The VM20 can also be table mounted using the optional TS20 table stand, available through Authorized Polk Audio Dealers or on the Polk website. For more information visit our website at www. Support de table pour VM20 La VM20 peut également être installée sur une table grâce au support TS20, disponible chez votre revendeur agréé Polk Audio ou sur notre site web: www. For more information visit our website at www. For more information visit our website at www. FIGURE 1 This diagram gives a suggested placement for your VM speakers, along with suggestions for placing rear speakers. Create an equilateral triangle between the speakers and the listening position. Attach the pedestal to the glass base using two (two) 16mm flat head screws and 2 (two) M4T nuts. For more information visit our website at www. WALL MOUNTING VM10/20 LOUDSPEAKERS FIGURE 3 Use the included Wall Mount Template to locate, either vertically or horizontally, the wall mount bracket holes. WALL MOUNTING VM10/20 LOUDSPEAKERS The VM Cradle/Wall Mount Bracket enables you to set the angle of your speaker over a wide range of adjustment because of the steep and shallow angles of the bracket's two faces and the pivot knuckle assemblies. These bolts should go through the back of the bracket, through the pivot knuckle and into the inserts located in the back of the VM10/VM20 enclosure. Set the angle of the speaker by moving the pivot knuckles, then tighten the bolts securely. Important note: Once the speaker is mounted on the wall, the speaker angle cannot be adjusted. [. . . ] This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. Be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. Or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. [. . . ]