User manual POLTI AS 519 FLY

[. . . ] Do not allow the power cord to be twisted, crushed, stretched, or come into contact with sharp or hot surfaces. Do not use the appliance if the power cable or other important parts are damaged. Do not use electric extension leads that are not authorized by the manufacturer, as they may cause damage or fire. If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of a special tool is necessary. [. . . ] AT T E N T I O N Directive 2002/96/EC (Waste Electrical and Electronic Equipment - WEEE): information for users This product complies with EU Directive 2002/96/EC. The crossed-out wastebasket symbol on the appliance means that at the end of its useful lifespan, the product must be disposed of separately from ordinary household wastes. The user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. Appropriate separate collection to permit recycling, treatment and environmentally compatible disposal helps prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. For more information on available collection facilities, contact your local waste collection service or the shop where you bought this appliance. FUNCTIONING · Unroll the supply cable (11) till reaching the yellow sign on the cable itself, by pulling it as shown in fig 1. DO NOT under any circumstances unroll beyond the red sign. · Insert the suction opening on hose (D) into connection (5) (fig. · Plug into a suitable power outlet. The ON/OFF switch (7) can also be operated by touching it with your foot, so you do not have to bend. · It is possible to regulate suction power through the slide cursor (9). Moving the cursor forward, the power increases, moving the cursor backwards the power decreases. We recommend minimum power for curtains, medium-low power for sofas, armchairs and cushions, medium-high for carpets and high for floors and hard surfaces (ceramics, marble, etc. ). · Thanks to the manual suction regulator (C2), the suctioning power can be changed according to the cleaning task, and it allows you to stop promptly in case of accidental suctioning (e. g. We recommend an open regulator on curtains, carpets, sofas and so on. Move the regulator forward till uncovering the hole on the hose. To suction again at maximum power, move the regulator backwards till it covers the hole. · To stop vacuuming, press again the ON/OFF switch (7). E M P T Y I N G A N D C L E A N I N G T H E D U S T C O N TA I N E R · Switch off the appliance (7). Disconnect the supply cable (11) from the mains. · Disconnect the flex hose (D) from the appliance, by pressing button (C1) and pulling out the hose. · Press the button to detach the dust container (4) on the top lid (3) (fig. 3). · Remove the dust container (1), holding it by the handle (2). [. . . ] · Let the filters dry naturally, away from light and heat sources. You should wait 24 hours before reassembling filters in the appliance. · Replace the filters if they are torn. · Filters should be cleaned every 4 months. [. . . ]