User manual POLTI FAV 30 LECOASPIRA

[. . . ] Visit our official Customer Services department to register channel: www. Search the illustrative video for Vaporetto You can benefit from a special welcome Lecoaspira in order to see a quick and offer, in participating countries, and keep easy overview of all the features of this up to date on all the latest Polti news, as amazing appliance. Well as buy accessories and consumables. In addition, the video guide will lead you To register your product, in addition to through use of the Vaporetto Lecoaspira your personal information, you must enter from preparation for use to simple the serial number (SN) which you will find maintenance operations. [. . . ] For safety reasons, engage the steam lock on the handle during vacuuming. 3 For steam cleaning and suction attach the rug/carpet frame (2c) to the universal brush (2) (see page 4). Attach the cloth supplied (10) to the universal brush (2) (see page 5). 4 (see page 5) Turn on the boiler by pressing the boiler button and adjust the strength of the steam using the steam adjustment dial (to turn the boiler off press the boiler button again); for this type of surface we recommend steam level 1/2. The steam indicator light ( ) comes on, and then turns off when the correct temperature has been reached. ) Make sure that you have prepared the appliance following the instructions listed in Chapter 1 and connect the accessories listed in Chapter 2. 1 Lock the two extension tubes (3) onto the handle (1). 2 For suction only, connect the universal brush (2) with the bristle frame (2a) and press the suction button on the appliance to proceed with the cleaning operations. | 29 | ENGLISH PRELIMINARE LECOASPIRA FAV20_30 - 2015_vers7:UNICO 22/04/2015 10. 45 Pagina 30 WARNING: For additional safety, test steam delivery on a hidden part, leave the steamed part to dry to ensure that no changes in colour or deformations have occurred. 5 Deactivate the steam lock and continue with the steam delivery and suction, pressing the steam trigger on the handle, and the suction button on the appliance. 6 It is possible to use the suction and steam features either together or by alternating them, activating both as described in the previous points. Combined use of steam and suction allows the most efficient sanitising of the surface, dissolving dirt and removing grease, germs and mites; it allows brightens the colour of fibres and dries surfaces more quickly. To avoid any dirt in the dirt collector causing bad smells, we recommend emptying and cleaning after every use according to the methods described in Chapter 15. ) WARNING: Before cleaning leather or fabrics with steam, consult the manufacturer’s instructions and always carry out a test on a hidden part or on a sample of the material. Allow the steamed part to dry to make sure that no changes in colour or deformations have occurred. Make sure that you have prepared the appliance following the instructions listed in Chapter 1 and connect the accessories listed in Chapter 2. 1 For suction only, connect the nozzle for frames (7) to the handle (1) and press the suction button on the appliance to proceed with the cleaning operations. 2 For steam cleaning and suction use the nozzle for frames (7) with the cap (9) attached and connect it to the handle (1) or to the extension tubes (3) (see page 5). 3 (see page 5) Turn on the boiler by pressing the boiler button and adjust the strength of the steam using the steam adjustment dial (to turn the boiler off press the boiler button again); for this type of surface we recommend steam level 1/2. The steam indicator light ( ) comes on, and then turns off when the correct temperature has been reached. Ensure that the steam lock on the handle is deactivated. [. . . ] Loss of steam or drops of water between The seals are damaged. replace the seals , as indicated in Chapter 18. After vacuuming liquids, the liquid vacuumed comes out of the brush. Suck in air for a few seconds to allow the transfer of the liquid to the tank. [. . . ]