User manual POLTI FAV 50 MULTIFLOOR LECOASPIRA

[. . . ] Visit our official Customer Services department to register channel: www. Search the illustrative video for Vaporetto You can benefit from a special welcome Lecoaspira in order to see a quick and offer, in participating countries, and keep easy overview of all the features of this up to date on all the latest Polti news, as amazing appliance. Well as buy accessories and consumables. In addition, the video guide will lead you To register your product, in addition to through use of the Vaporetto Lecoaspira your personal information, you must enter from preparation for use to simple the serial number (SN) which you will find maintenance operations. [. . . ] Before removing the cloth from the brush, wait a few minutes to allow the cloth to cool. Alternatively, the Multifloor Function can be used by pressing the boiler button again when the steam indicator light ( ) is constant (see Chapter 10). Combined use of steam and suction allows the most efficient sanitising of the surface, dissolving dirt and removing grease, germs and mites; it allows brightens the colour of fibres and dries surfaces more quickly. CLEANING GLASS, WINDOWS AND TILES ENGLISH WARNING: To clean glass surfaces during cold weather, preheat the windows starting to vacuum from a distance of about 50 cm from the surface. Make sure that you have prepared the appliance following the instructions listed in Chapter 1 and connect the accessories listed in Chapter 2. 1 (see page 5) Turn on the boiler by pressing the boiler button and adjust the strength of the steam using the steam adjustment dial (to turn the boiler off press the boiler button again); for this type of surface we recommend steam level 3. The steam indicator light ( ) will start flashing and continue until the correct temperature has been reached. 2 Connect the steam + suction nozzle (7) to the handle (1) or to the extension tubes (3) and attach the window cleaning accessory (7a) (see page 5). Ensure that the steam lock on the handle is deactivated. 3 Press and hold the steam trigger on the handle (1) and steam the surface abundantly to dissolve the dirt. 4 Activate suction and run the steam + suction nozzle (7) with the window cleaning accessory (7a) over the surface to proceed with the drying. For safety reasons, engage the steam lock on the handle during vacuuming. 2 For steam cleaning and suction use the nozzle for frames (7) with the cap (9) attached and connect it to the handle (1) or to the extension tubes (3) (see page 5). 3 (see page 5) Turn on the boiler by pressing the boiler button and adjust the strength of the steam using the steam adjustment dial (to turn the boiler off press the boiler button again); for this type of surface we recommend steam level 1/2. The steam indicator light ( ) will start flashing and continue until the correct temperature has been reached. Ensure that the steam lock on the handle is deactivated. 4 It is possible to use the suction and steam features either together or by alternating them, activating both as described in the previous points. Combined use of steam and suction allows the most efficient sanitising of the surface, dissolving dirt and removing grease, germs and mites; it allows brightens the colour of fibres and dries surfaces more quickly. CLEANING FURNITURE AND DELICATE SURFACES WARNING: Do not direct the steam jet directly onto surfaces. Before cleaning the surface, always do a test on a hidden part and see how it reacts to the application of steam. 1 Connect the suction lance (11) or the steam + suction nozzle (7) to the handle and press the suction button on the appliance (see Chapter 2). To adjust the suction power, hold the suction button down (the suction indicators will start to light up) until the desired suction level is reached. [. . . ] 31 Pagina 32 PROBLEM After vacuuming liquids, the liquid vacuumed comes out of the brush. SOLUTION Suck in air for a few seconds to allow the transfer of the liquid to the tank. The appliance turns off while using suc- Water filter collector full or tion. Turn off and disconnect the appliance from the mains. [. . . ]