User manual POLTI LECOASPIRA 910 KIT

[. . . ] aspira 910 KIT 18 20 21 16 17 19 34 29 13 11 11 12 15 6 5 1 15 4 10 14 26 27 28 13 30 31 33 32 22 22 24a 24 23 14 7 3 2 98 25 C N V E1 C E E1 R A3 A4 A2 B1 B3 A1 E2 E3 O P E5 G E4 S A5 C C J C K F L D Q M T Z U W1 X B2 Y W Q B3 B2 ENGLISH aspira 910 KIT KEY 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 24a) 25) 26) 27) 28) 29) 30) 31) 32) 33) 34) Main switch Boiler ON switch Boiler OFF switch Boiler ON lamp Lamp indicating lack of water in tank Pressure indicator lamp Steam control knob Suction ON/UP push-button Suction DOWN push-button Suction UP indicator lamps Flex-winder pins Power cable extension tube holder Clasps for locking the extension tubes into place Castors Air output screen Lever for opening air output screen HEPA filter Rear filter sponge Sealing cap of the self-filling tank Carrying handle Lid of accessory compartment Accessory compartment on cover (Figure 9) Flap of the built-in socket Built-in socket Water container Handle of water container Lever for opening the handle of the water container "EcoActive Filter" water-based filter assembly Lid of filter cage Shaped filtering sponge Filter body with microholed net Ring for locking the tube elbow Tube elbow Air outlet filter closure KEY A1) A2) A3) A4) A5) B1) B2) B3) C) D) E) E1) E2) E3) E4) E5) F) G) J) K) L) M) N) O) P) Q) R) S) T) U) V) W) W1) X) Y) Z) TO ACCESSORIES Fitting for connecting accessories Handle Safety button Suction push-button Steam push-button Flexible steam + suction tube One-piece plug Push-button for locking one-piece plug Push-button for locking accessories in place Steam + suction extension tubes Universal brush Slides for locking fittings into place Bristle fitting Liquid-suction fitting Carpet fitting Cotton cloths Joker brush Parquet accessory Steam-suction window-cleaning fitting 120° steam-suction accessory Small coloured 120° steam-suction brushes 120° accessory steam-suction upholstery nozzle Small steam-suction upholstery nozzle Window-cleaning futtung for small steam-suction upholstery nozzle Bristle fitting for small steam-suction upholstery nozzle Upholstery nozzle Nozzle Radiator brush Cleaning brush Filler bottle Spare gaskets Iron Continuous stream button Steam-delivery button Temperature-control knob Iron mat Polti S. p. A. reserves the right to change equipment or accessory specification without prior notice. This unit conforms with EC-directives 89/336 as amended by 93/68 (EMC) and 73/23 as amended by 93/68 (low voltage). ENGLISH CORRECT USE OF THE PRODUCT This appliance is intended for use as a steam generator and for sucking liquids and solids as described and in accordance with the instructions provided in this manual. Please read these instructions carefully and keep them, as you may find them useful in future. P R E PA R AT I O N F O R U S E · Pull the sealing cap of the self-filling tank (20) upwards (Figure 1) and fill the tank with normal tap water (using the special anti-drop filler bottle (U) provided for this purpose) up to the MAX indicator on the water input opening. The required quantity is about 2. 6 litres. [. . . ] synthetic materials, enamelled surfaces, etc. ), we strongly recommend using the steam at its lowest output power. When cleaning glazed surfaces, if the weather is particularly cold pre-heat the glass working at distance of about 50 cm away from the surface. To take care of your plants, we recommend spraying them from a distance of at least 50 cm. UNIVERSAL BRUSH (E) Use of this brush is recommended for large surfaces such as ceramic or marble flooring, wooden flooring, carpets, etc. . - Bristled fitting (E2), when the suction function alone is required. - Liquid-suction fitting (E3), for removing moisture, suitable for smooth surfaces. - Carpet fitting (E4), suitable for wall-to-wall carpeting and loose carpets. The universal brush can be connected to the flexible tube by means of the extension tubes (D) or it can be fitted directly onto the handle. Assembly of the universal brush: To apply the various different fittings to the universal brush, move the two slides (E1) on the rear of the brush outwards and apply the appropriate fitting for the type of surface to be cleaned. To lock the fitting into place move the two slides (E1) inwards. Do not apply steam directly to wooden surfaces. ENGLISH STEAM-SUCTION WINDOW-CLEANING FITTING (J) Use of this accessory is recommended on large windows, large mirrors and smooth surfaces in general. The steam-suction window-cleaning fitting (J) can be connected to the flexible tube by means of the extension (D) or it can be fitted directly onto the handle (A2). To use the steam-suction window-cleaning fitting correctly proceed as follows: - Release steam evenly onto the surface to be cleaned in order to dissolve the dirt. - Press the rubber wiper onto the surface to be cleaned, moving it from the top downwards with the suction function on. Warning: When the weather is particularly cold, pre-heat the windows by releasing steam from a distance of about 50 cm onto the surface to be treated. 1 2 0° S T E A M - S U C T I O N A C C E S S O RY ( K ) Use of this accessory is recommended for concealed areas that are difficult to reach with other accessories, such as: - Treating stains on carpeting or loose carpets, before going over them with the brush; - Cleaning stainless steel, windows, mirrors, layered coatings and paintwork; - Cleaning corners such as stairs, window frames, door jambs, aluminium sections; - Cleaning the bases of taps; - Cleaning blinds, radiators, the interiors of cars; - Atomising house plants from a distance; - Removing smells and creases from cloths. The 120° accessory can also be fitted directly onto the handle (A2), or it can be connected to the flexible tube by means of the extension tubes (D). It is possible to combine the 120° accessory with the following other accessories: - small coloured brushes 120° (L), suitable for removing caked dirt from very small surfaces such as cooking rings, shutters, between tiles, sanitary fittings and so on. The different colours mean that you can always keep the same small brush for use on the same type of surface. - 120° accessory upholstery nozzle (M), suitable for cleaning narrow surfaces such as between tiles, door jambs, the openings in shutters and so on. - Upholstery nozzle (Q), suitable for cleaning textile surfaces, such as the seams of sofas and armchairs, mattresses, car seats and so on. - Cleaning brush (T), suitable for dusting delicate surfaces such as frames, books and so on, thanks to its soft bristles. - Nozzle (R), suitable for applying strong suction in difficult places such as skirtingboards, the folds of sofas and armchairs, padded furniture, car seats, etc. By applying the radiator brush (S) to the tip of the nozzle (R) it will become easy to reach inside the gaps in the radiators to remove the dust that accumulates there. ENGLISH S M A L L S T E A M - S U C T I O N U P H O L S T E RY N O Z Z L E ( N ) Use of this accessory is recommended on various types of medium-sized surfaces or for washing textile surfaces such as sofas, mattresses and so on, using the following fittings that are supplied with it: - the window-cleaning fitting (O), which is recommended for small mirrors, small windows, reinforced concrete and glass walls, etc. . [. . . ] - The wiring system to which the appliance is connected must always comply with the laws in force. - In order to avoid prejudicing the safety of the appliance, use only original spare parts and accessories approved by the manufacturer. - Do not use the appliance if the power cable or other important parts of it are damaged. - Do not use the appliance to suck up acids or solvents, as these might cause serious damage to the appliance, and above all do not suck in explosive dust or liquids, as these could cause explosions on coming into contact with the inside components of the appliance. [. . . ]