User manual POLTI PTEU0243

[. . . ] The optional accessories are on sale at all the best domestic appliance retailers or online at www. Com and in good appliance shops you will find a wide range of accessories to increase the performance and the practical applications of your appliances to make home cleaning even easier. To check the compatibility of an accessory with your appliance, search the code PAEUXXXX/PFEUXXXX listed next to each accessory on page 3. If the accessory code you wish to buy is not listed in this manual, please contact our Customer Service team for more information. [. . . ] Carefully screw the safety cap back on (2), checking that it is fully tightened. This operation must always be carried out when the boiler has cooled and with the power cable disconnected from the mains. 3 Open the door of the built-in socket and insert the built-in plug of the steam hose (4), pressing the specific button and making sure that the hooking pin is inserted perfectly in the specific locking hole on the socket. Completely unwind the power cable before plugging it into the mains and before use, and always use the appliance with the power cable completely unwound. 5 Press the boiler switch and the accessories switch, which will light up (6). 6 Wait for the boiler switch to turn off. WARNING: if steam is escaping from the safety cap, switch the appliance off and unplug it from the mains. Wait for two hour for the appliance to cool before unscrewing the cap and screwing it back on. WARNING: Never leave the filling bottle or the funnel resting on the mouth of the boiler, with the product connected to the power supply, since this could cause burns. WARNING: When first operating steam, there may be some drops of water mixed with the steam due to temperature imbalances. Direct the first jet of steam onto a rag. Never use distilled water, rain water or water containing additives (e. CLEANING FLOORS Before using the appliance on delicate surfaces, ensure that the part in contact with the surface is free from foreign bodies that could cause scratches. 1 Make sure that Chapter 1 has been followed and connect the accessories as indicated in Chapter 2. 2 Connect the extension tubes to the steam hose and the floor brush to the extension tubes. 3 Attach the supplied cloth to the floor brush, locking it in place with the special lever hooks. 4 Adjust the intensity of the steam by turning the adjustment knob; for this type of surface we recommend Level 3 steam (9) 3. 5 Deactivate the steam lock (8) and continue with steam delivery, pressing the steam trigger on the handle of the steam hose (7). Before removing the cloth from the brush, wait a few minutes to allow the cloth to cool. Warning: Do not use the appliance without the cloth. WARNING: For additional safety, test steam delivery on a hidden part, leave the steamed part to dry to ensure that no changes in colour or deformations have occurred. 5 Press and hold the steam trigger on the handle of the steam hose (7) and steam the surface thoroughly to dissolve the dirt. [. . . ] Lubricate the seals with silicone grease or Vaseline, or alternatively with a small amount of vegetable oil. Turn the blocking button to the correct position as indicated in Chapter 2. The blocking button is not in the correct position. 02 Pagina 24 WARRANTY This appliance is for domestic use only and is guaranteed for two years from the date of purchase against any defects present at the time the goods are handed over; the date of purchase must be proven via a proof of purchase document valid for tax purposes and issued by the seller. [. . . ]