User manual POLTI STEAM DISINFECTOR

[. . . ] Before treating delicate or unusual surfaces, consult the manufacturer's instructions and always carry out a test on a hidden part or on a sample of the material. Allow the steamed part to dry to make sure that no changes in colour or deformations have occurred. Any use which does not comply with these instructions will invalidate the warranty. The wiring system to which the appliance is connected must always comply with the laws in force. [. . . ] The system delivers saturated steam at a high temperature combined with HPMed. The system lowers the bacterial, fungous and viral load on the surfaces to which it is applied. This makes it possible to reduce the possibility of cross-infections. Read these instructions carefully and keep them for future reference. Polti S. p. A declines all liability for any damages or accidents deriving from any use of this appliance which is not in conformity with the instructions contained in this manual. AT T E N T I O N Directive 2002/96/EC (Waste Electrical and Electronic Equipment - WEEE): information for users This product complies with EU Directive 2002/96/EC. The crossed-out wastebasket symbol on the appliance means that at the end of its useful lifespan, the product must be disposed of separately from ordinary household wastes. The user is responsible for delivering the appliance to an appropriate collection facility at the end of its useful lifespan. Appropriate separate collection to permit recycling, treatment and environmentally compatible disposal helps to prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. Unlawful disposal by the owner involves the application of the administrative sanctions envisaged by current legislation. HPMED The characteristics of HPMed make it the ideal complement to the sanitising action of the saturated steam at a high temperature delivered by Steam Disinfector Polti. The system is able to sanitise all surfaces at risk of contamination by pathogenic organisms, such as bacteria, fungi and viruses. When combined with the steam of the Steam Disinfector Polti, HPMed is also able to eliminate smells. Instructions for use: Fit the disposable bottle into the delivery device following the instructions in paragraph "DISPOSABLE BOTTLE OF HPMED". Switch on the machine following the manufacturer's instructions. Once the system is ready, distribute the steam and HPMED. Mixed with the steam, the product will normally dry within 30 seconds to one minute, depending on the environmental conditions. Warnings: Keep out of the reach of children. In case of contact with eyes, rinse with plenty of water and seek medical advice. HPMED is a cleaning product for hard surfaces. 648/2004) P R E PA R I N G F O R U S E · Connect the monoblock (9) to your steam generator, as described in the user's manual for the generator. · Fit the disposable bottle into the delivery device following the instructions in paragraph "DISPOSABLE BOTTLE OF HPMED". [. . . ] Before starting to use the device, make sure that the material to be treated can withstand high temperatures. CONNECTION OF ACCESSORIES To connect the accessories to the delivery device, proceed as follows: Straight extension accessory (A) Curved extension accessory (B) Bring the accessory chosen into line with the delivery device nozzle (4) and rotate the accessory until it locks into place (fig. 4) S TO R I N G T H E D E V I C E When you have finished using the device, put it away in a clean and dry place after disconnecting it from the power mains. Keep it away from sources of heat and protect from the weather. Do not expose the device to extreme temperatures. [. . . ]