User manual POLTI VAPORELLA INOX 3500 R

[. . . ] Before leaving the factory, all our products are subjected to rigorous testing. Your VAPORELLA INOX 3500 R already contains some water, so we recommend that you do not add any further water until all the steam is used up. ENGLISH OPERATION 1) Unscrew the patented safety cap (1) and fill the boiler with about 0. [. . . ] If during use the generator switch (2) light up, you can continue ironing, as this indicates correct functioning. ⷠWhen the iron is no longer delivering steam, switch off the boiler switch (2), open the patented safety cap (1), wait 2-3 minutes for the boiler to cool down, and then refill. ⷠDuring initial operation of the iron, a few drops of water mixed with steam may come out of the soleplate until the temperature stabilises. It is advisable to direct the first jets of steam onto an old cloth. ⷠEnsure the patented safety cap is fully and correctly screwed on, otherwise you may experience steam escaping from around the cap. wARNINGS · Never have the appliance unattended when it is plugged in. ⷠAlways unplug before filling. ⷠThe appliance is fitted with a safety thermostat, which should only be replaced by an authorised technician. ⷠWhen repairing or replacing any component, and in particular the special safety cap, only use original parts. ⷠIf the patented safety cannot be opened for cold filling of the device, plug in the power cable plug (4), switch on the iron switch (3) and press the button (8) to eliminate any residual pressure in the boiler. ⷠIf replacement of the power supply cable (4) should become necessary, please be sure to consult only a qualified electrician or your Polti Service Center. Connecting it to other power sources may damage the unit. wARNING - This appliance must be earthed. This appliance may be fitted with a non rewirable plug, if it is necessary to change the fuse in a non rewirable plug the fuse cover must be refitted. [. . . ] The wire which is coloured brown must be connected to the terminal which is marked with the letter "L" or coloured red. ENGLISH HOW TO ACHIEVE PERFECT IRONING To achieve perfect ironing using conventional irons, you have to iron the fabric several times with the hot iron to dry all residual moisture. Perfect ironing is dependent on these two characteristics: the suction which locks the garment on the board, so preventing the formation of annoying wrinkles which are so difficult to eliminate on conventional ironing boards, and the heated board which dries the fabrics and makes ironing easier, faster and less laborious. [. . . ]