User manual POLTI VAPORETTO 15001500 KIT

[. . . ] 4a 9 11 9 5 2 2A 6 8 12 11 10 4 1 3 Fig. 6 7 13 11 OFF ON 15 14 16 11 11 21 17 V 18 11 19 11 23 11 9 U R S Q 20 24 22 T 5 6 4 Read these instructions carefully before using the appliance. GENERATOR A)Patented Safety Cap; B)Generator on/off switch; C)Accessory on/off switch D)Central connector block with splash proof cover; E)Lock-in aperture for central connector; F)Power supply cable; G)Carrying handle; H)Pivoting wheels; I)Steam regulation control; M) Cable winder ACCESSORIES 1)Flexible hose; 2)Steam gun; 2A)Safety switch; 3)Steam request button; 4)Connector assembly; 5)Connector button; 6) Connector locking tab; 7)Extension tubes; 8)Large brush; 9)Cloth retaining clips; 10)Brush fitting; 11)Accessories locking button; 12)Small brush; 13)Cotton cloths; 14)Filler funnel; 15)Spare gaskets for accessory connections; ACCESSORIES SOLD SEPARATELY 16)120° accessory; 17)Small round brush for 120° accessory; 18)Window squeegee tool; 19)Small blade for window tool; 20)Large blade for window tool; 21)High pressure lance; 22)Triangular brush; 23)Large round brush for 120° accessory; 24)Wallpaper stripper tool; *Q)Iron; R)Steam request button; S)Temperature regulation control; T)Iron rest mat; U)Continuous steam jet button; V)"Iron heating" indicator. * (included for 1500 Kit) This apparatus conforms with EC 89/336 directive modified by 93/68 (EMC) and 73/23 directive, modified by 93/68 ( low voltage) POLTI S. p. A, reserves the right without prior notice to introduce technical and construction changes as it considers necessary. PRECAUTIONS KEEP THESE INSTRUCTIONS · Read these instructions for use carefully before using the appliance. [. . . ] This is a preventive against scale build-up and protects the metal walls of the steam generator tank. KALSTOP is available from Polti dealers or by mail-order from your Polti Service Centre. · We recommend you use original Polti products only, as products of other brands may not be suitable for use in Polti products and could cause damage. · Never use distilled water or scented water. · Make sure the patented safety cap is fully and correctly screwed on, patented safety cap (A) is fully and correctly screwed on, otherwise you may experience steam escaping from around the cap. Connect the power supply cable (F) into an earthed power supply of the correct voltage. WARNING: Do NOT under any circumstances put or leave the filler funnel in the water filling aperture of the appliance when the appliance is connected to the mains electricity supply. Press the generator on/off switch (B) and the accessories on/off switch (C) which will light up. Open the cover of the central connector block (D) and insert the connector assembly (4) pressing the connector button (5) taking care that the locking tab (6) is correctly positioned in the lock-in aperture (E) on the block (Fig. 3a. Wait for the generator on/off switch (B) to go out. The steam gun (2) is equipped with a safety switch (2A) which prevents the accidental start of the steam jet by children or people who do not know how to operate the appliance. With the switch (2A) in the "OFF" position, the lever controlling the steam jet is locked (Fig. 4b). Should the hose be left unattended for a moment whilst the appliance is connected to the mains, it is recommended to put the safety switch in the "OFF" position. To start working, set the (2A) button to the "ON" position and press the steam button (Fig. 4a). The first burst of steam may contain some water droplets, due to imperfect thermic stabilisation inside the flexible hose. We would therefore advise that the first jet of steam is played onto an old cloth until a constant pressure of steam is obtained. Note: The generator on/off switch (B) may go on and off from time to time during use of VAPORETTO. This indicates the machine is maintaining the correct and constant pressure and is quite normal. S T E A M R E G U L AT I O N F E AT U R E Some VAPORETTO models come equipped with a steam regulator control (I) (Fig 5). You can use this control to increase the steam flow by turning in an anti-clockwise direction. Turning the control in a clockwise direction reduces the steam flow. Here are some suggestions for the choice of steam flow level: Strong steam: For encrusted dirt, stains, sanitising, grease Normal steam: For carpets, rugs, glass, tiles etc. [. . . ] Particularly dirty rugs may need several treatments. Obstinate stains may require the use of the steam gun prior to treatment. SMALL BRUSH (12) The small brush is used whenever the big brush is too big or not practical to be used. The small brush can be connected directly to the steam gun or to the extension tubes. [. . . ]