User manual POLTI VAPORETTO 250

[. . . ] With your purchase of a Polti Ecological Cleaning System you have opted for perfect safety and ecological cleaning: · just use normal tap water. Do not put any other cleaning substances in the generator tank. ⷠWith the special No-Volt feature (exclusive Polti patent) there is absolutely no electrical current in the hand gun which makes for absolute safety GENERATOR 13) Cotton cloths A) in use. Safety Cap Patented 14) Filler bottle B) Main Generator on/off switch 15) Spare washers for accessory C) The splash proof protects your applianceconnections · Accessory on/off switch even if accidentally brought in D) Central connector block 16) 120° nozzle to contact proof cover with splash with liquids. [. . . ] in order to restore the output , just press the steam request lever. Note: The pressure indicator light (K) may go on and off from time to time during use of VAPORETTO. This indicates the machine maintaining the correct and constant pressure and is quite normal. Some VAPORETTO models come equipped with a steam regulator control (I) (Fig. You can use this control to increase the steam flow by turning in an anti-clockwise direction. turning the control in a clockwise direction reduces the steam flow. Here are some suggestions for the choice of steam flow level: Strong steam: For encrusted dirt, stains, sanitising, grease Normal steam: For carpets, rugs, glass, tiles etc. delicate steam: For vaporising plants and cleaning delicate fabrics , upholstery , wallpaper etc. Please read separate warning about use on draylon, velvet and other delicate fabrics, or on sensitive wood surfaces. Move the connector button (11) back to the position `closed' 4b. All POLTI machines are equipped with the unique Polti patented safety cap, which prevents opening of the generator tank as long as there is any pressure remaining inside the tank. This is an important and indispensable safety device, and it is necessary to follow certain procedures when re-filling the tank. According to model, `water out' is indicated by a warning light (J), or by an audible alarm signal from the machine, or on more basic models by the exhaustion of the steam output. Whenever you have used up all the water in the tank, follow the following procedures: 1c. switch off the machine at the generator on/off switch (B) 2c. Press the steam request lever (3) on the hand gun (2) or, if using the iron, the steam request button (R) on the iron (Q) so as to fully exhaust the steam supply from the tank. Disconnect the power supply cable (F) from the mains. Wait 3 to 4 minutes to allow the generator tank to cool down. When cool proceed to carefully refill the tank as described in paragraph 1 of the section "Preparation for Use" in the instructions. If refilling the generator when not completely cooled, we recommend that you carefully pour only very small quantities of water at each pouring into the tank, so as to avoid spitting from the tank and cover exposed skin whilst filling. For dry ironing set the temperature control dial according to the fabric to be ironed as indicated on the dial. Wait three to four minutes for the indicator (R) to go out indicating that the sole plate of the iron has reached the correct temperature. [. . . ] 120° STEAM NOZZLE (16) The 120° nozzle (which can be connected directly to the gun or together with the extension tubes) allows you to concentrate a powerful jet of steam to otherwise inaccessible locations, such as radiators, door posts, sills and shutters, as well as for sterilising toilet bowls. WINDOW SQUEEGEE TOOL (18, 19, 20) The Window Squeegee Tool allows you to clean effectively and rapidly all glass surfaces without using detergents. Your glass wilI remain cleaner longer thanks to the absence of layers of film normally left behind by chemical cleaning products on which new dust and grease can attach itself. Cleaning glass is done in two stages: - Spraying the steam onto the surface to be cleaned to loosen the dirt (not touching with blade). [. . . ]