User manual POLTI VAPORETTO 2600 KIT

[. . . ] G O 2 L A I 5 3 2A 1 B C D 6 F 4 URS V Q 5 H E 6 4 11 7 11 12 15 T 9 11 9 23 11 21 13 14 11 24 9 8 16 11 10 11 18 19 11 20 22 17 Fig. M0S07612 - Edizione 1O03 VAPORETTO 2600 - VAPORETTO 2600 KIT Read these instructions carefully before using the appliance. Dear Customer, Congratulations and thank you for purchasing this POLTI product, contributing to the conservation of our most precious natural resource: the Environment. VAPORETTO solves all cleaning and hygiene problems without the use of detergents - all that's needed is just normal tap water which our system transforms into steam at a constant powerful pressure, allowing you to clean more thoroughly and in an ecological way. Our Technical Development team have added a range of sophisticated improvements to make cleaning tasks both safer and more effective: · The No Volt System - a unique Polti patent, designed so that there is no electricity to the on/off switch on the handle, making it absolutely safe even if the handle is accidentally brought into contact with liquids. [. . . ] Connect the power supply cable (F) into an earthed power supply of the correct voltage. WARNING: Do NOT under any circumstances put or leave the filler bottle in the water filling aperture of the appliance when the appliance is connected to the mains electricity supply. Always make sure generator on/off switch (B) is switched OFF before connecting the appliance to the mains. Press down the generator on/off switch (B) and the accessories on/off switch (C) which will light up. CONNECTION OF ACCESSORIES All the accessories of VAPORETTO can be connected to the handle or to the extension tubes as per the following instructions (fig. Move the locking button (11) on the accessory to the "open" position. Attach the required accessory to the hand gun or to the extension tube. Move the locking button (11) back to the position `closed'. Check that the locking button has engaged and the accessory is fully connected. P R E S S U R E I N D I C AT O R Vaporetto is equipped with a precise indicator instrument (L) displaying operating pressure. PAT E N T E D S A F E T Y C A P / '' WAT E R O U T '' The appliance is equipped with a safety cap, which prevents opening of the generator tank as long as there is any pressure remaining inside. This is an important and indispensable safety device, and it is necessary to follow the procedure here below when re-filling the generator tank. When you have used up all the water in the tank, proceed as follows: 1c. Switch off the machine at the generator on/off switch (B) 2c. Press the steam request lever (3) on the steam gun (2) or, if using the iron, the steam request button (R) on the iron (Q) so as to fully exhaust the steam supply from the tank. Switch OFF the accessory on/off switch (C). Disconnect the power supply cable (F) from the mains. Unscrew anti-clockwise the patented safety cap (A) 6c. Wait for a few minutes to allow the generator tank to cool down. When cool proceed to carefully refill the tank as described in paragraph 1 of the section "Preparation for Use". If refilling the generator when not completely cooled, pour only very small quantities of water at each pouring into the tank, so as to avoid spitting from the tank, and cover exposed skin and face whilst filling USE OF THE PROFESSIONAL IRON (included for 2600 Kit) 1d. Connect the connector assembly at the end of the iron hose (4) to the generator as shown in point 2a of the section "Instructions for Use". [. . . ] The small brush can be connected directly to the steam gun or to the extension tubes. The small brush can be used on: · furnishing fabrics (after testing on a small hidden area) · car linings (not pile surfaces), car windows (not in freezing temperatures) · small window surfaces · tile and other small surfaces To clean wood ( doorposts , floors etc) do not apply the steam directly but cover the brush (big or small) with a doubled cotton cloth. For furniture cleaning, direct the steam jet onto a dry cotton cloth, and then start the cleaning. The warm moisture on the cloth traps the dust, spots and the static electricity so that the furniture stays clean longer. [. . . ]