User manual POLYCOM VSX

[. . . ] product pic here Integrator's Reference Manual for the VSX Series Version 8. 5 May 2006 Edition 3725-21905-004/A VSX Version 8. 5 Trademark Information Polycom®, the Polycom logo design, SoundStation®, SoundStation VTX 1000®, and Vortex® are registered trademarks of Polycom, Inc. , and Conference ComposerTM, Global Management SystemTM, ImageShareTM, MGCTM, People+ContentTM, Polycom InstantDesignerTM, Polycom PathNavigatorTM, PowerCamTM, SirenTM, StereoSurroundTM, Visual ConcertTM, VSXTM, and VTXTM are trademarks of Polycom, Inc. in the United States and various other countries. VISCA is a trademark of Sony Corporation. All other trademarks are the property of their respective owners. Patent Information The accompanying product is protected by one or more U. S. [. . . ] 10: 10 Mbps, auto duplex 10hdx: 10 Mbps, half duplex 10fdx: 10 Mbps, full duplex 100: 100 Mbps, auto duplex 100hdx: 100 Mbps, half duplex 100fdx: 100 Mbps, full duplex Feedback Examples lanport auto restart system for changes to take effect. <y, n> Comments After making a change, you are prompted to restart the system. User interface screen location: System > Admin Settings > LAN Properties (page 2): LAN Speed and Duplex Mode 4 - 153 Integrator's Reference Manual for the VSX Series linestate Sets or gets API session registration to receive notifications about IP or ISDN line state changes. Syntax linestate get linestate <register|unregister> Parameter get register unregister Description Returns the current setting. Registers to receive notification when IP or ISDN line states change. Unregisters to receive notification when IP or ISDN line states change. Feedback Examples Key off of "linestate:" · · linestate registered linestate unregistered Comments IP line state changes are only received in a serial API session. 4 - 154 System Commands listen Registers the RS-232 session to listen for incoming video calls, phone calls, or system sleep or awake state and, consequently, to give notification when the registered state occurs. Syntax listen <video|phone|sleep> Parameter video Description Instructs the session to listen for incoming video calls. When this event occurs, the message "listen video ringing" is received. Instructs the session to listen for incoming phone calls. When this event occurs, the message "listen phone ringing" is received. Instructs the session to listen for when the system goes into sleep mode. When this event occurs, the message "listen going to sleep" is received. When the system wakes up, the message "listen waking up" is received. Polycom recommends using sleep register instead of this command. phone sleep Feedback Examples Key off of "listen:" listen sleep returns listen sleep registered to acknowledge that the session is now registered to listen for sleep mode. listen going to sleep is notification that the system is going to sleep mode. listen waking up is notification that the system is waking up. 4 - 155 Integrator's Reference Manual for the VSX Series localdatetime Sets or gets whether to display the local date and time on the home screen. Syntax localdatetime <get|yes|no> Parameter get yes no Description Returns the current setting. Displays the local date and time on the home screen. Removes the local date and time from the home screen. Feedback Examples · · localdatetime no localdatetime yes Comments User interface screen location: System > Admin Settings > General Settings > Home Screen Settings (page 2): Local Date and Time 4 - 156 System Commands marqueedisplaytext Sets or gets the text to display in the dialing entry field on the Place a Call screen. Syntax marqueedisplaytext get marqueedisplaytext set "text" Parameter get set Description Returns the current marquee display text. Sets the text to display in the dialing entry field followed by the text to use. Enclose the string in quotation marks if it includes spaces. Enclose the character string in quotation marks if it includes spaces. If "text" is omitted, the system automatically sets it to Welcome. "text" Feedback Examples · marqueedisplaytext <empty> marqueedisplaytext set "select an entry from the directory" · returns marqueedisplaytext "select an entry from the directory" Comments This option is only available when the dialingdisplay is set to display a marquee. [. . . ] It is important that one controller operate all devices in the room so that only one user interface needs to be learned by those managing the facility. The common controller also makes it much easier to expand and enhance room capabilities over time by adding or upgrading equipment. A proper room controller can operate and coordinate the use of lighting, curtains, displays, audio devices, VCRs and slide projectors, as well as all the conferencing equipment, including any network-related control needed. In lieu of a complete control system, a limited functionality controller can be located at the presentation interface panel to control the switching and routing of the computer graphics and configure the overhead camera video paths. [. . . ]