User manual POULAN 810EPT

[. . . ] R ENGLISH Please do not return product to retailer. Por favor, no devuelva el producto al lugar de compra. Veuillez ne pas retourner le produit au détaillant. 1-800-554-6723 Register your product online at: Registre su producto en línea en: Enregistrez votre produit en ligne à l'adresse : www. poulan. com Instruction Manual Manual de Instrucciones Manuel d'Instructions ESPAÑOL 810 EPT WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Read instructions carefully before assembling. [. . . ] Maintain proper control of the unit until the blade has completely stopped moving. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade when it is moving. 8 WARNING: Inspect area before starting unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation. S Never place objects inside the vacuum tube(s). Always direct the blowing debris away from people, animals, glass, and solid objects such as trees, automobiles, walls, etc. The force of air can cause rocks, dirt, or sticks to be thrown or to ricochet which can hurt people or animals, break glass, or cause other damage. S Never run unit without the proper equipment attached. When using your unit as a vacuum, always install vacuum tube(s). For additional information, refer to the safety section of the instruction manual supplied with your pruner attachment. WARNING: WARNING: Never lean over discharge chute. Rocks or debris could be thrown into the eyes and face and cause serious injury or blindness. WARNING: Inspect the area where the unit is to be used. Remove objects that could be thrown or damage the unit. Some objects may be hidden by fallen snow - be alert for the possibility. S Direct material discharge away from glass enclosures, automobiles, etc. S Do not run motor at high speed while not removing snow. S Be attentive when using the snowthrower, and stay alert for holes in the terrain and other hidden hazards. S Make sure the rotor will spin freely before attaching the snowthrower to the powerhead. S If the rotor will not rotate freely due to frozen ice, thaw the unit thoroughly before attempting to operate under power. The snow thrower could propel small objects at high speed causing injury. S After striking a foreign object, stop the unit, disconnect from the power source and inspect the snowthrower for damage and repair if necessary before restarting unit. [. . . ] Remove cover and pull 4 inches (10 cm) of line out of head. Replace spool. Chain stops during cut. 1. Trimmer head stops under a load or does not turn when switch is pressed. Line does not advance or breaks while cutting. [. . . ]