User manual POWAKADDY FWII

[. . . ] You will need to put your battery on charge straight away. Before you play a full round it will need a full 12 hour charge minimum. Wheel Fitting Instructions ­ Simply slide the wheel onto the spindle, press the yellow button firmly and click home. The wheels can go on either side of the trolley. [. . . ] The first screen will be displayed with the FWII logo and you will be offered '' + 'X'. Highlight the 'X' using the then press . Bottom left ­ Yards/metres indicates the total distance travelled for the current shot. This can be returned to zero by holding + arrows together. When fully charged, 5 bars will be shown and a full 18 hole round can be expected, or 36 holes if using a 36 hole battery. If alternative wheels are used this will affect the speed and distance readings. NOTE ­ as a power saving feature, if no button is pressed for 5 minutes, the screen will power down. Touch any button and the screen will return to view. Your new FWII is fitted with a Digital Distance Function (DDF). This will allow your machine to proceed ahead of you for a pre-determined distance and then stop. Hold down the button for 4 seconds and the DDF screen will be displayed, offering you a choice of 10, 20 or 30 yards/metres approximately. Select your chosen distance using the and arrows and then select using the button. Your screen will now turn white as a clear indication that you are in competition mode and you will not have any measurements shown on the screen except actual speed of travel. the speed setting and the time will still be displayed in the normal way. Although the total distance covered is not shown, it will be added to the total distance covered recorded in the trolley memory. Your machine will then move off and stop after the selected distance has been covered. DDF will not function when the machine is in competition mode. There are several features that you can programme as `user preferences' within the on board computer of the FWII. To enter the programming mode, disconnect the battery and then reconnect it whilst simultaneously holding down the button, after 5 seconds a programming screen will be displayed. We strongly recommend that removal or replacement should be done by a PowaKaddy Service Agent. [. . . ] Use the arrows to move between the categories displayed and the button to select. time ­ highlight the word time , press the button. Now use the to move along the digits of the digital display and the to adjust the highlighted field, once the time is set, press . Once you have programmed your desired settings, unplug the battery and the settings will be saved. [. . . ]