User manual POWERFIX KH 4260 BICYCLE HOIST

[. . . ] Read these operating instructions carefully before using the device for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the device at a future date. [. . . ] nEVER perform repairs on the suspended load. Should the nylon cord become damaged, replace it immediately. Ensure that the nylon cord does not slide too fast between your hands!The bicycle hoist may not be operated by weak persons, for example, children. The bicycle could crash down and cause injuries. Ensure that the holding hooks cannot slip from the saddle and handlebar when raising or lowering of the bicycle. IMPORTANT Before use, check to ensure that the holding hook can reach under the saddle and find a firm hold there, for example on a raised edge, a cross bar or similar. Should a secure attachment of the holding hook onto the saddle not be possible, the bicycle hoist may not be used with this particular bicycle!Measure the distance between the handlebars and the saddle of your bicycle. Attach both ceiling mounts to the ceiling using the supplied cross-head screws. Pass the nylon cord through the ceiling mounts and make a solid double-knot on the end. Run the nylon cord, starting at the ceiling support, alternately through the rollers. Pass the nylon cord through the safety device (A) of the ceiling mount, the holding hooks (B) and the handle (C). Check for the correct tightness of all screws before using the bicycle hoist. [. . . ] We, Kompernaß GmbH, Burgstraße 21, D-44867 Bochum, declare on our sole responsibility that this product complies with all of the requirements of the Machinery Directive 2006/42/EC. Lämna in den till ett företag som har tillstånd att ta hand om den här typen av avfall eller till din kommunala avfallsanläggning. [. . . ]