User manual POWERFIX PDS 45 A1

[. . . ] Claims of any kind for damage resulting from unintended use will not be accepted. Items supplied and transport inspection This torque wrench is supplied with the following components as standard: ▯ ½ ” Torgue wrench with ratchet and quick release (manufactured as per DIN ISO 6789) ▯ ½“ Extension piece125 mm ▯ ½“ Sockets 17 mm, 19 mm and 21 mm ▯ Storage box ▯ This operating manual 22 PDS 45 A1 Buch_74190_LB1. 12 16:11 NOTICE ► Check the contents to ensure everything is available and for signs of visible damage. [. . . ] –  Do not turn the setting below the lowest torque marking (less than 28 Nm). –  This tool is robust and suitable for domestic use, but it is also a precision tool and should therefore be treated as such. –  Before each use check the correct setting of the actuation value and the correct seating of the accessory being used. –  Store the torque wrench exclusively at room temperatures (15° 25°C) so as not to falsify the actuation levels. –  A calibration of the torque wrench should be performed only by qualified personnel. Loosen the locking screw (do not remove it) at the lower end of the torque wrench by turning it anti-clockwise. The precise setting of the torque value is made by using the ring and the main scale . In the following example, this scale process is explained for a torque of 120 Nm. Turn the hand-grip until its upper edge reaches the kinked downmeets wards marking of 112 Nm and the ”0” of the ring scale (see Figure A). With this step, the centre line of the main scale you have made the rough adjustment. Further to the right, until the ”8” on the ring 4. Turn the hand-grip meets the centre line of the main scale (see Figure B). Scale With this you have made the fine adjustment and the torque wrench is now set to 120 Nm. Turn the locking screw clockwise to lock the set torque value. Use the switching lever (tighten or loosen) of the ratchet. To attach and detach the extension piece/socket wrenches, press on the top of the torque wrench. [. . . ] This product is for domestic use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorised service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]