User manual POWERFIX PLW 3 A1 LASER SPIRIT LEVEL

[. . . ] Claims of any kind resulting from damage caused by improper use, incompetent repairs, unauthorized modifications or the use of non-approved spare parts will not be acknowledged. Risk of personal injury and property damage before use check the appliance for visible external damage. Do not take into operation an appliance that is damaged or has been dropped. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. [. . . ] Restrainer Spirit level (vertical alignment) Spirit level (horizontal alignment) On/Off switch Laser exit opening Battery compartment Loosen the screw of the battery compartment cover with a crosshead screwdriver and remove the battery compartment cover. insert the 2 Type AAA/Micro batteries resp. Replace the used batteries with new ones. Pay heed to the correct polarity, as shown in the battery compartment 7 . Do not allow the measuring tape to rewind itself without control, instead, guide it back by hand. There is also a risk of personal injury!NOTICE With the measuring tape you can read off measurements of length in the metric system or in the Anglo/American system. The upper scale shows lengths in feet and inches, the lower scale in meters and centimeters. slide the restrainer 2 to the position UNLOCK. Pull the measuring tape Secure the measuring tape out to the required length. When you roll the measuring tape back up or wish to adjust it to a new length, hold the end firmly and slide the restrainer 2 to the position UNLOCK. Now allow the measuring tape to roll back slowly, without releasing it. Hold the appliance with the narrow side to the wall, so that the spirit levels 3 and 4 are facing forward. Align the Laser Spirit Level such that the air bubble in the spirit level 4 lies exactly in the middle of the markings. Hold the appliance with the narrow side to the wall, so that the spirit levels 3 and 4 are facing forward. Align the Laser Spirit Level such that the air bubble in the spirit level 3 lies exactly in the middle of the markings. With the exception of battery exchanges this appliance is maintenance-free. IMPORTANT To avoid damage to the appliance, ensure that moisture cannot penetrate it during cleaning. Clean the outer surfaces with a soft and lint-free cloth. Clean the laser exit openings 6 with a soft brush. Do not dispose of the appliance in your normal domestic waste. This product is subject to the European Directive 2002/96/EC-WEEE (Waste Electrical and Electronic Equipment). [. . . ] This product is for domestic use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs made under the warranty. [. . . ]