User manual PRESIDENT PM-1000 WP

[. . . ] Technical Support and Service Your GPE dealer can provide you with sales assistance and information. If your marine radio does not perform properly, follow the troubleshooting tips in the back of this operating guide. Be sure that a qualified technician services your radio equipment. [. . . ] turning On the Unit and Setting Squelch 1. Before you turn On the unit, turn the squelch SQ knob fully counterclockwise. Then, turn On the unit by turning the Volume/Power VOL knob clockwise until you hear a hissing sound. Turn the SQ knob clockwise, just until the hissing sound stops. use the knob to adjust to the desired squelch level. Think of the squelch control as a frequency gate which controls access to weak or strong signals depending on its setting. To listen to a weak or distant station, turn the knob counterclockwise. If reception is poor, turn it clockwise to cut out weak transmissions. If the squelch control is adjusted so that you continually hear a hissing sound, the unit will not scan properly. To turn Off the unit, turn the VOL knob counterclockwise until it clicks. One-touch Channel 16/9 Example: While you are monitoring channel 20, you want to check channel 16 or channel 9. While in Triple Watch mode, you can change the currently selected channel using the or button. Programming a Channel into Memory Before using the scanning feature, you have to program channels into memory. Scanning starts from the lowest to highest channel and stops when it finds an active channel. It remains on that channel until the transmission ends, then resumes scanning after a 2 second delay period. When in the scan mode, the unit automatically activates the Triple Watch feature. [. . . ] Any repair under warranty will be free of charge and the transport costs for sending back will be on charge of our company. A proof of purchase must compulsorily be added to the transceiver in need of repair. Don't install your transceiver without having read this instructions manual. [. . . ]