User manual PRIMA PEK100C

[. . . ] IMPORTANT, PLEASE RETAIN THIS WARRANTY Under this guarantee any parts found to be defective will be repaired or replaced free of charge. Please ask your retailer to either stamp this warranty or simply attach your store receipt. This guarantee in no way affects your rights under statutory law. NAME____________________________________________________________ ADDRESS_________________________________________________________ Electric Knife Model: PEK100 ___________________________________________________________________ PURCHASED FROM_________________________________________________ DATE OF PURCHASE ___________________MODEL_____________________ The Prima International PLC. [. . . ] Do not operate the appliance with a damaged cord or plug after the appliance malfunctions, or is dropped or damaged in any manner. Return appliances to the nearest authorised service facility for examination, repair or electrical or mechanical adjustment. The use of attachments not recommended or sold by manufacturer may cause, fire electric shock or injury. Do not let cord hang over edge of table or counter or touch hot surfaces. Do not use appliance for other than intended use. SAVE THESE INSTRUCTIONS Always ensure that the cord grip is positioned and securely fastened. HOW TO INSERT THE BLADES CAUTION: Never insert or remove blades while knife is plugged into electrical outlet. HANDLING BLADES: Always hold with the serrated blades away from you. Fasten the two blades together at the front end by sliding the rivet head on one blade into the slot in the other blade. Slide blades together until both plastic grease guards are in line. Insert unsharpened ends of the blades into the slot in the front of the knife. This is done with maximum ease and safety by grasping the plastic grease guards between thumb and forefinger with the serrated edges of the blades down and away from you (see above illustration). Push both blades into the slot until both click into place. If one blade clicks in the locked position before the other, just slide the unseated blade further into the knife by pushing on its grease guard. Plug cord into any local voltage AC outlet. TO REMOVE BLADES Disconnect knife from electrical outlet. [. . . ] WARNING: ON NO ACCOUNT MUST EITHER THE LIVE OR NEUTRAL WIRES BE CONNECTED TO THE EARTH TERMINAL HANDLE: wipe with a clean damp cloth. BLADES: wash them as you would any other fine carving knife. NOTE: your knife never needs lubrication. [. . . ]