User manual PRIMARE I32

[. . . ] Press O again to switch to standby. 3 i32 user guide using the i32 This page explains how to operate your I32, using the functions available from the front panel or C23 remote control. Front panel controls Volume Changes the volume. selecting a source The I32 provides a choice of five inputs. Initially these are labelled IN1 to IN5, but you can give them your own aliases to suit the sources in your system; see To give an alias to a source, page 6. changing the volume The I32 allows you to vary the volume from 0 (silence) to 79 (maximum). changing the balance You can change the balance of the sound between the left and right channels to shift the position of the stereo image. Standby O Switches the I32 to standby, or switches it on from standby. To change the volume To select a source · Menu @ Press and hold to display the settings menu. Turn the SELECTOR until the source is indicated on the front panel display; for example: · Rotate the VOLUME control on the front panel, or press the + or ­ buttons (or the < or > buttons) on the remote control. To change the balance · Press the BAL/ST button on the remote control. Select R In the settings menu: Edits a setting. IN2 The current volume setting is shown on the front panel; for example: VOL28 · Cancel In the settings menu: Cancels editing a setting, or saves an alias. Selector Selects an input. In general settings: Selects a setting. Alternatively, press the A or V buttons on the remote control to step between sources, or press one of the buttons 1 to 5 on the remote control to select the corresponding source directly. changing the d i s p l ay b r i g h t n e s s To change the front panel display brightness The front panel display shows the current balance setting, where 00LR-9 corresponds to the leftmost position, 00LR00 corresponds to centre, and -9LR00 corresponds to the rightmost position. · · Press the DIM button on the remote control to step through the three levels of illumination and blank. Rotate the VOLUME control on the front panel, or press the < or > buttons on the remote control. The current balance setting is shown on the front panel; for example: The display auto-dims after a few seconds and returns to the selected brightness when you operate any control. -7LR00 4 i32 user guide using the remote control This page explains how to use the C23 remote control to operate the I32, and how to fit the batteries into the remote control. Fitting the b at t e r i e s Mute the sound Change the display brightness Switch on/off Select an input Before using the remote control you need to insert the two AAA batteries supplied with the C23. · Gently slide open the cover on the back of the remote control: · Select I32 mode Insert the two batteries, observing the polarity printed on the bottom of battery compartment: Decrease the volume Increase the volume Select previous input or move up on settings menu Move balance right Edit item on settings menu Select next input or move down on settings menu Control the CD player Move balance left · Slide back the cover until it clips into place: Display the settings menu Change the balance Note: Replace only with alkaline batteries type AAA, LR03, or equivalent. When disposing of old batteries please be considerate to the environment. i32 user guide conFiguring the settings The I32 includes a General settings menu that allows you to customise the inputs to suit the sources in your system. [. . . ] WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the plug fully into the socket. This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions. CAUTION ATTENTION 5. Heat The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, and the point where they exit from the appliance. Locate the appliance away from naked flames or heat producing equipment such as radiators, stoves or other appliances (including other amplifiers) that produce heat. 6. Grounding The appliance has been designed for use in moderate climates. Ensure that the grounding means of the appliance is not defeated. 7. Power lines Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack it should be moved with great care, to avoid overturning the combination. Locate any outdoor antenna/aerial away from power lines. 13. Take heed of warnings & instructions Unplug the unit from the mains supply before cleaning. The case should normally only require a wipe with a soft, damp, lint-free cloth. Do not use paint thinners or other chemical solvents for cleaning. We do not advise the use of furniture cleaning sprays or polishes as they can cause indelible white marks if the unit is subsequently wiped with a damp cloth. If the unit has a stand-by function, a small amount of current will continue to flow into the equipment in this mode. Unplug the power cord of the appliance from the outlet if left unused for a long period of time. Safety compliance This product has been designed to meet the IEC 60065 international electrical safety standard. You should read all the safety and operating instructions before operating this appliance. Retain this handbook for future reference and adhere to all warnings in the handbook or on the appliance. 14. Abnormal smell If an abnormal smell or smoke is detected from the appliance, turn the power off immediately and unplug the unit from the wall outlet. Water and moisture The presence of electricity near water can be dangerous. [. . . ] Damage requiring service The appliance should be serviced by qualified service personnel when: A. the power-supply cord or the plug has been damaged, or B. objects have fallen, or liquid has spilled into the appliance, or C. [. . . ]