User manual PRIMARE REMOTE CONTROL KEYS V2.3

[. . . ] Value (0x0c) (0x01) (0x02) (0x1e) (0x1f) (0x1a) (0x31) (0x10) (0x11) (0x0a) (0x3c) (0x3d) (0x3e) (0x3f) Action Standby ON (common) Standby ON (unique) Operate (Standby OFF) Next input Previous input Toggle input mode (balance, master volume) Toggle mute on/off Increase/change master volume and balance Decrease/change master volume and balance Toggle display on/off Used for main input selection Used for main input selection Used for main input selection Used for main input selection For complete command, just add system address value 1280 with key value 1 (for standby) = 1281 (0x0501). 3 A30. 1 / I30 Remote Control Commands. RC5 address = 20 (0x14) bits: 0x0500 = 0000 0101 0000 0000 (=1280) xxxx tsss ssdd dddd (s ssss = 1 0100 = 0x14 = 20) x=not used t=toggle bit s=system bits (address) d=command (VALUE below) short press (default) = 1 command. long press = 3 consecutive identical commands Note !. Commands in Red Require Firmware update for use on A30. 1 and some I30. Key standby standby operate step up step down input mode mute plus minus dim 1 2 3 4 5 6 Dec. Value 12 1 2 30 31 26 49 16 17 10 60 61 62 63 3 4 Hex. [. . . ] Value Hex Value Action standby 50 (0x32) Toggle Standby/Operate operate 58 (0x3a) Operate (Standby OFF) standby 59 (0x3b) Standby (Standby ON) step up 16 (0x10) In menus: previous row Other: Next input step down 17 (0x11) In menus: next row Other: Previous input input mode 26 (0x1a) toggle input mode (balance, center, side, rear, sub, master) mute 49 (0x31) Toggle mute on/off plus 30 (0x1e) In menus: menucommand "next" Other: Increase/change master volume, balance, center, side, rear, sub minus 31 (0x1f) In menus: menucommand "previous" Other: Decrease/change master volume, balance, center, side, rear, sub dim 10 (0x0a) Toggle display on/off menu 38 (0x26) In menus: short press = previous menu long press = leave menus Other: Enter menus mode 42 (0x2a) Next surround mode for 2ch inputs select 43 (0x2b) In menus: menucommand "next" record 48 (0x30) Next input for record path (This command does not exist on SPA21) 1 13 (0x0d) Used for main input selection 2 14 (0x0e) Used for main input selection 3 15 (0x0f) Used for main input selection 4 18 (0x12) Used for main input selection 5 19 (0x13) Used for main input selection 6 20 (0x14) Used for main input selection 7 21 (0x15) Used for main input selection 8 22 (0x16) Used for main input selection 9 23 (0x17) Used for main input selection 0 24 (0x18) Used for main input selection 10 47 (0x2f) Used for main input selection For complete command, just add system address value 1792 with key value 50 (for standby) = 1842 (0x0732). 9 V10 / V20 / V25 Remote Control commands. NEC system (32 bits) SYSTEM CODE: Key Open Power Mute Goto Menu Title 1 2 3 Audio 4 5 6 Angle 7 8 9 Subtitle 0 Subtitle_On Setp Repeat Repeat_AB SlowSlow+: Program Clear Display Zoom Setup Return Play Stop Up Down Left Right Rew Ff Prev Next Power_Off (unique): Power_On (unique): Dimmer Select 00FEH Dec. Value 65 93 73 77 85 88 64 68 80 92 72 76 84 27 3 7 19 31 15 26 2 18 30 10 14 22 28 0 4 16 24 8 20 5 13 1 25 69 9 21 29 11 23 89 17 Hex. Value 0x41 0x5D 0x49 0x4D 0x55 0x58 0x40 0x44 0x50 0x5C 0x48 0x4C 0x54 0x1B 0x03 0x07 0x13 0x1F 0x0F 0x1A 0x02 0x12 0x1E 0x0A 0x0E 0x16 0x1C 0x00 0x04 0x10 0x18 0x08 0x14 0x05 0x0D 0x01 0x19 0x45 0x09 0x15 0x1D 0x0B 0x17 0x59 0x11 Action (Note!only for V25 with newer software) (Note!only for V25 with newer software) 10 DVD30 Remote Control Keys Remote Control commands. RC5 address = 12 (0x0c) bits: 0x0300 = 0000 0011 0000 0000 (=768) xxxx tsss ssdd dddd (s ssss = 0 1100 = 0x0c = 12) x=not used t=toggle bit s=system bits (address) d=command (VALUE below) short press (default) = 1 command. long press = 3 consecutive identical commands Key STOP FF REW SKIP+ SKIPPLAY PAUSE OPEN/CLOSE POWER ON/OFF JOG FWD 0 JOG FWD 1 JOG FWD 2 JOG FWD 3 JOG REV 0 JOG REV 1 JOG REV 2 JOG REV 3 VNR (picture adjust) POWER ON POWER OFF SUBTITLE CURSOR LEFT CURSOR RIGHT CURSOR UP CURSOR DOWN FUNCTION MEMORY CONDITION MEMORY LAST MEMORY MULTISPEED FWD 1 MULTISPEED FWD 2 Dec. Value 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 23 24 25 26 27 28 29 30 31 32 Hex. Value Action 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10 0x11 0x12 0x13 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 0x20 11 MULTISPEED REV 1 MULTISPEED REV 2 STEP/SLOW FWD STEP/SLOW REV 0 1 2 3 4 5 6 7 8 9 +10 SETUP MENU TOPMENU DISPLAY (osd) SEARCHMODE ANGLE AUDIO REPEAT REPEAT A-B RANDOM CLEAR PROGRAM ENTER RETURN DIMMER PLAY/PAUSE 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 0x30 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F 12 P30 Remote Control commands. RC5 address = 20 (0x14) bits: 0x0500 = 0000 0101 0000 0000 (=1280) xxxx tsss ssdd dddd (s ssss = 1 0100 = 0x14 = 20) x=not used t=toggle bit s=system bits (address) d=command (VALUE below) Key standby step up step down input mode Dec. Value (0x27) (0x1e) (0x1f) (0x1a) Action Standby ON In menus: menucommand "next" Other: Next input In menus: menucommand "previous" Other: Previous input In menus: short press = previous menu long press = leave menus short press = toggle input mode (balance, center, rear, sub, master) Other long press = enter menus Toggle mute on/off In menus: previous row Other: Increase/change master volume, balance, center, rear, sub In menus: next row Other: Decrease/change master volume, balance, center, rear, sub Toggle display on/off Enter/leave menus mute plus minus dim menu 12 16 17 10 38 (0x0c) (0x10) (0x11) (0x0a) (0x26) For complete command, just add system address value 1280 with key value 39 (for standby) = 1319 (0x0527). 13 DVD26 Remote Control Keys Remote Control commands. long press = 3 consecutive identical commands Key Standby Operate Standby Up Down Input 1 Input 2 Preset 1 Preset 2 Bypass Dim Dec. Value (0x01) (0x02) (0x0c) (0x03) (0x04) (0x05) (0x06) (0x07) (0x08) (0x09) (0x0A) Action Standby ON Standby Off Toggle Standby/Operate Increasing delay time Decreasing delay time Used for main input selection. Used for mail input selection Delaytime memory 1 Delaytime memory 2 Enable bypass mode. Toggle DIM Mode For complete command, just add system address value 0512 with key value 1 (for operate) = 0513 (0x0201). 17 T23 Remote Control Commands. RC5 address = 16 (0x10) bits: 0x0800 = 0000 1000 0000 0000 (=2048) xxxx tsss ssdd dddd (s ssss = 1 0000 = 0x10 = 16) x=not used t=toggle bit s=system bits (address) d=command (VALUE below) short press (default) = 1 command. long press = 3 consecutive identical commands Due to compability reasons command , 4, 5, 6 should not be used. Key Operate / Standby Display Mono / Auto FM Manual Tune UP DAB service +, menu + FM Manual Tune Down DAB service -, menu Preset 1 (direct) Preset 2 (direct) Preset 3 (direct) Preset 4 (direct) Preset 5 (direct) Preset 6 (direct) Preset 7 (direct) Preset 8 (direct) Preset 9 (direct) Preset 0 Store (mem) Preset +10 Clear Preset UP (DAB/FM) Preset Down (DAB/FM) Dim toggle Standby Mode Off (unique) Standby mode On (unique) FM Search up FM Search down Select Auto, default Mono Dec. Value 1 2 3 8 9 10 11 12 13 14 15 16 17 18 24 19 23 29 20 21 22 25 26 27 28 30 31 32 Hex. Value (0x01) (0x02) (0x07) (0x08) (0x09) (0x0a) (0x0b) (0x0c) (0x0d) (0x0e) (0x0f) (0x10) (0x11) (0x12) (0x18) (0x13) (0x17) (0x1D) (0x14) (0x15) (0x16) (0x19) (0x1A) (0x1B) (0x1C) (0x1E) (0x1F) (0x20) Action (Toggle) (Shifts between RDS info) toggle (in DAB-mode, enter menu) (long press search up) (long press search down) (toggle between DIM-modes) (in FM, enable auto-shift stereo/mono), (unique) (in FM, enable mono mode), (unique) 18 Toggle DAB / FM mode DAB mode (unique) FM mode (unique) 33 34 35 (0x21) (0x22) (0x23) For complete command, just add system address value 1024 with key value 1 (for operate) = 1025 (0x0401). 19 Cdi10 Remote Control Keys RC5 address = 14 (0x0e) bits: 0x0380 = 0000 0011 1000 0000 (=896) xxxx tsss ssdd dddd (s ssss = 0 1110 = 0x0e = 14) x=not used t=toggle bit s=system bits (address) d=command (VALUE below) short press (default) = 1 command. long press = 3 consecutive identical commands Key Standby 1 2 3 4 5 6 7 8 9 Clear 0 +10 Volume Arrow up Volume + Arrow Left Select Arrow Right stop Arrow Down Play/Pause toggle DIM Mode Display Open Skip back Mem Skip Forward REW Repeat FF IN1 IN2 Dec. Value Hex Value 8 0x08 Standby toggle 38 0x26 39 0x27 40 0x28 41 0x29 42 0x2A 43 0x2B 44 0x2C 45 0x2D 46 0x2E 58 0x3A 37 0x25 47 0x2F 29 26 30 24 60 25 0 27 63 62 54 51 7 4 23 3 2 55 1 17 20 0x1D 0x1A 0x1E 0x18 0x3C 0x19 0x00 0x1B 0x3F 0x3E 0x36 0x33 0x07 0x04 0x17 0x03 0x02 0x37 0x01 0x11 0x14 In FM Tune Down In FM Tune UP Action In FM toggle mono/Auto. [. . . ] Value 12 1 2 30 31 43 8 0 9 26 49 16 17 10 65 60 61 62 63 3 Hex Value 0x0C 0x01 0x02 0x1E 0x1F 0x2B 0x08 0x00 0x09 0x1A 0x31 0x10 0x11 0x0A 0x41 0x3C 0x3D 0x3E 0x3F 0x03 Describtion Standby on/off toggle Only standby Only Operate input / menu up input / menu down Menu navigation Menu navigation Menu navigation Menu navigation Mute toggle Volume up Volume down Toggle dim levels Menu navigation 27 History V16 Added: DVD-30, Sp31 (new model) V25 codes corrected. Date / revision number added to first page. V17 Updated DVD-30 codes V18 Added: I30, I21 DVD-26, CD21, CD31, Delaybox Minor error corrections (Text & layout). Primare Logo changed V19 Changed to SP31 / SPA21, Removed "new model". [. . . ]