User manual PRINCETON SEN914

[. . . ] REFERENCE MANUAL 914 Table of Contents Tips and safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Height adjustment, angle adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the MENU button 4 times to make the On Screen Display (OSD) Menu disappear. 10 Adjustment the screen display (When using an analog signal) Manual screen adjustment Adjustments can be made using On Screen Display (OSD) Menu provided. On Screen Display for adjustment This chapter provides the procedure how to adjust the screen by using operation Pattern. The SCREEN Menu will be displayed. SCREEN MANUAL MANUAL CLOCK PHASE H-POS V-POS AUTO 127 16 127 32 - Press the button to select [AUTO]. - To choose a menu option: / MODE button - To go to the next menu: MENU button CLOCK This feature will increase or decrease vertical picture alignments. Normally, Automatic Adjustment should be used. ( buttons) PHASE This feature will increase or decrease horizontal picture alignments. Normally Automatic Adjustment should be used. ( buttons) NOTE - Adjustments to [PHASE] should be made only after [CLOCK] has been correctly set. H-POS (horizontal positioning) and V-POS INPUT-1 ANALOG 1280x1024 V:60Hz H:64. 0kHz At this point relevant menu options can be adjusted. Each time the MENU button is pressed the next menu is selected. (SCREEN GAIN CONTROL COLOR MODE SELECT OSD Menu disappears) (vertical positioning) Note - The OSD Menu automatically disappears approximately 30 seconds after the last command. SCREEN Menu SCREEN MANUAL MANUAL CLOCK PHASE H-POS V-POS AUTO 127 16 127 32 To center the Adjustment Pattern within the boundaries of the screen, adjust the left-right (H-POS) values and the up-down (V-POS) values. ( buttons ) INPUT-1 ANALOG 1280x1024 V:60Hz H:64. 0kHz MANUAL: Individual menu options are manually adjusted. Auto: Every menu option is automatically adjusted. Note 11 Adjusting the screen display (When using an analog signal) GAIN CONTROL Menu GAIN CONTROL MANUAL MANUAL BRIGHTNESS CONTRAST AUTO 127 16 COLOR Menu COLOR 9300 6500 5000 USER R-CONTRAST G-CONTRAST B-CONTRAST INPUT-1 ANALOG 1280x1024 V:60Hz H:64. 0kHz INPUT-1 ANALOG 1280x1024 V:60Hz H:64. 0kHz MANUAL: Individual menu options are manually adjusted. AUTO: Every menu option is automatically adjusted using the Auto Gain Control* function. Notes: - Press the button to select [AUTO]. - To choose a menu option: / MODE button - To go to the next menu: MENU button *Auto Gain Control function - The Auto Gain Control adjusts contrast and brightness based on the brightest and darkest colors of the image displayed. If you are not using the Adjustment Pattern it is necessary to have black Area and white area of at least 5 mm × 5mm on the screen. Adjustment may not be possible without those areas. - If the signal coming from the computer is composite sync or sync on green, automatic adjustment cannot be performed. Please perform manual adjustment instead. [. . . ] Arms or stands able to be used Attachment must satisfy the following. - Have a gap of 100 mm × 100 mm between the screw holes on the section to be attached. - Note be likely to fall off or break off after being attached to the monitor. How to attach the arm or stand - Be careful not to overly bend the cable or add extension cords as this could lead to malfunction. [. . . ]