User manual PRINCETON ULTRA99F

[. . . ] Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided. The monitor should be operated only from the type of power source indicated on the label. [. . . ] · Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. · For maximum protection, repackage your monitor as it was originally packed at the factory. · To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it. 5 Front Panel Control : Press this knob to switch ON/OFF of monitor's power. · · MENU : Active OSD menu or function adjust confirm. · · / : Adjust brightness or function adjust. · EXIT : Exit a function or inactive OSD menu. · Power Indicator : Green -- Power On mode. Orange -- Off mode. How to adjust a setting The monitor controls are accessed by pressing button MENU to enable OSD (On-Screen-Display). The main menu will be displayed as follows. 1024 X 768 Figure 4 The OSD Message Note: If adjustment or selection of any OSD menu is not made for more than 10 seconds, the current setup will be saved and the OSD will disappear automatically. 6 Adjusting the picture The description for functional control icons 1. H-CENTER : : : Adjust the horizontal position of the picture. : H-SIZE Adjust the picture's horizontal size. : V-CENTER Adjust the vertical position of the picture. : V-SIZE Adjust the picture's vertical size. ZOOM : Adjust the picture's horizontal and vertical size simultaneously. PINCUSHION : Adjust the pincushion and barrel . TRAPEZOID : Adjust the picture's trapezoid distortion. PIN-BALANCE : Adjust to compensate the pincushion unbalance. PARALLELOGRAM : Adjust the picture to be a rectangle. [. . . ] *Inspect monitor's video cable and make sure none of the pins are bent. *Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. Missing one of the primary colors *Inspect the monitor's video cable and (RED, GREEN, or BLUE) make sure that none of the pins are bent. [. . . ]