User manual PRINCETON VL1514

[. . . ] Set the LCD Monitor box in an upright position and open from the top of the box before removing the right/left cushions. 2. Remove the back cover from your monitor (pull from the bottom of cover to open) to install your PC system. Accessories 1 pc AC/DC Adaptor 1 pc Power Cord 1 pc Audio Cable (Optional) 1 pc User's Manual 1 Installing the Monitor DO NOT install the monitor where sudden temperature changes may occur, or in humid, dusty, or smoky areas as it may cause fire, electric shock or damage. DO NOT place your LCD Monitor near a window as it may be severely damaged if exposed to rain, water, moisture, or sunlight. MAINTAIN good ventilation; covering of ventilation slots or holes may cause fire. [. . . ] a) Press the " " and "-" buttons simultaneously and the "CONTROL LOCK" screen is displayed. b) Press "+" button, and it will become "CONTROL LOCK' status. The "LOCKED" will be displayed in the up-right corner of screen indicating that OSD is in locked position. To release the "CONTROL LOCK', press " " and "-" buttons simultaneously and "CONTROL LOCK" screen will appear. Press "-" button to release the "CONTROL LOCK'. The "CONTROL LOCK" screen will disappear automatically. Volume control: directly push "+" and "-" button to turn up/down audio volume. c) d) Menu Table Main Menu Sub Menu Function Name BRIGHTNESS CONTRAST Function Adjusts the level of brightness and darkness. Adjusts the RGB color pattern set of the contrast. Adjusts the level of darkness on black portion. Adjusts the number of pixels from source video. Adjusts the phase relative to video Hsync signal. Moves the screen horizontally (left/right) Moves the screen vertically (up/down) To auto adjust press the "+" button. Automatically adjusts the clock, phase, H/V position values for the most optimal settings. Return to factory preset value Changes the OSD position. Power management function BL BLACK LEVEL CLOCK CLOCK PHASE HORIZONTAL POSITION VERTICAL POSITION AUTO SETUP AUTO ADJUST ALL RESET OSD POSITION POWER SAVE LANGUAGE VOLUME (optional) Adjust the volume of built-in speaker. Press "+" and "-" to choose OSD language "-" Represents the TEXT mode. DISPLAY MODE "+" Represents the GRAPHIC mode. (For resolutions lower than 1024 x 768) STANDARD: Factory preset color COLOR CUSTOM: Preferred color is adjusted. 5 FOR YOUR SAFETY WARNING ALWAYS OPERATE UNDER SPECIFIED POWER SUPPLY Usage of incorrect voltage will cause malfunction and may cause fire or electric shock. PROTECT and CORRECTLY USE THE CABLE Do not pull or bend the power cable and signal cable or place the monitor or any heavy objects on the cables. If the cables are damaged, they may cause fire or electric shock. IMMEDIATELY STOP OPERATING THE MONITOR WHEN YOU DETECT ANY ABNORMAL OCCURENCE If you notice any abnormal phenomenon such as strange noise, smoke or smells, unplug the monitor and contact your dealer or the nearest service center immediately. DO NOT DISASSEMBLE Disassembly may expose you to the danger of fire or electric shock. DO NOT PUT ANY FOREIGN OBJECT INSIDE THE MONITOR It may cause fire, electric shock or damage when operating the monitor with foreign objects inside. DO NOT USE THE MONITOR NEAR WATER Operating the monitor in close proximity to water where the water may be spilt or splashed onto the monitor may cause fire or electric shock. BAD WEATHER CONDITIONS It is advisable not to operate the monitor during heavy thunderstorms as intermittent breaks in power may cause malfunction. Do not touch the plug under these circumstances as it may cause electric shock. CAUTION DISCONNECT CABLES WHEN MOVING THE MONITOR When moving the monitor, always turn off the switch, unplug the monitor, and disconnect the signal cable. If the cables are not properly disconnected when moving the monitor, it may cause fire or electric shock. DO NOT TOUCH THE PLUG WITH WET HANDS Pulling or inserting the plug with wet hands may cause electric shock. HOLD THE PLUG WHEN DISCONNECTING To disconnect the power cable or signal cable, always pull the cable by the plug. Never pull on the cable as this may cause fire or electric shock. OTHERS ERGONOMIC RECOMMENDATIONS Do not operate the monitor in a dark room or against a bright background. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged period of time, a ten-minute-break per hour is recommended. 6 SPECIAL NOTES ON LCD MONITORS The following are normal with LCD monitors and do not indicate a problem. [. . . ] Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. 9 www. princetongraphics. com Part No. : 14AP1511A00 Ref No. : 00300000348 © 2003 Princeton Digital (USA) Corp. This manual may not be copied in whole or in part without the written consent of Princeton Digital (USA) Corp. Product Specifications are subject to change without notice. [. . . ]