User manual PROGRESS PC3305

[. . . ] 19. 6. ifu3316 15. 06. qxd 2004. 06. 15. 12:09 Page 3 PROGRESS PC3305, PC3315, PC3316 English Deutsch Français Italiano Español Português - 18 - -3- ifu3316 15. 06. qxd 2004. 06. 15. 12:09 Page 4 English PROGRESS PC3305, PC3315, PC3316 DESCRIPTION OF PARTS 1. Suction inlet Dustbag full indicator Power regulator On/off switch Cable rewind button Wheel Dustbag compartment Carrying handle Compartment open button Hose 11. Metal tubes (PC3305) Telescopic tubes (PC3315, PC3316) Dual purpose floor nozzle Crevice nozzle Upholstery nozzle with plush plate Dustbag Horizontal parking Vertical parking Accessory holder (integrated in the rear of the cleaner) IMPORTANT SAFEGUARDS Please read this instruction booklet carefully. [. . . ] Do not unplug the vacuum cleaner with wet hands. Do not operate or store the vacuum cleaner too close to heaters and radiators, stoves etc. Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in order to prevent damage to the dustbag and hose. INSTRUCTIONS FOR USE Before operating the vacuum cleaner, make certain that the filters are in the proper position. Unwind a sufficient length of cable and insert the plug into the power socket. A YELLOW mark on the power cable shows the ideal cable length. Do not extend the cable beyond the RED mark. Press the ON/OFF button to switch the appliance on. It is advisable to set the power control to MIN before switching on the appliance. To rewind the power cable, press the rewind button with your foot, and guide the cable with your hand to ensure that it does not whip causing damage. By moving the variable power control, the suction power can be adjusted. -4- - 17 - ifu3316 15. 06. qxd 2004. 06. 15. 12:09 Page 5 PROGRESS PC3305, PC3315, PC3316 MAINTENANCE REPLACING THE DUSTBAG Always operate the cleaner with the dustbag installed. If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. After removing the flexible hose, open the front cover using the compartment open button (fig. Rotate the support of the bag to the vertical position. Remove the dustbag and insert a new one (fig. Close the cover by pressing down until it clicks (fig. The dustbag reference number is Menalux BT 236. BLOCKED AIRFLOW AND DIRTY FILTERS The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 45-60 minutes. Restart the cleaner. CLEANING / REPLACING THE FILTERS The dustbag must be replaced if the window of the dustbag full indicator is illuminated. [. . . ] 23). PROTECTING THE ENVIRONMENT Attempt to recycle packaging material and old appliances. The cardboard packaging can be placed in the waste paper collection. Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling. [. . . ]