User manual PROGRESS PC4103

[. . . ] Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rat- ing plate. Do not switch the appliance on if it appears to be faulty in any way or it has a damaged cord or plug. [. . . ] It is advisable to set the power control to MIN before switching on the appliance. To rewind the power cable, press the rewind button with foot, and guide the cable with hand to ensure that it does not whip causing damage. By moving the variable power control, the suction power can be adjusted. -4- - 29 - PROGRESS PC 4100, 4101, 4102, 4103, 4105 MAINTENANCE REPLACING THE DUSTBAG Always operate the cleaner with the dustbag installed. If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. After removing the flexible hose, open the front cover (fig. Remove the dustbag and insert a new one (fig. Close the cover by pressing down until it clicks (fig. Dustbag reference number: Menalux T218, BT218, CP218 TEXTILE DUST BAG (PC 4101, 4102, 4103) Remove the textile bag from the holder (fig. Slide the plastic clip away from the bag to open and empty (fig. Replace the plastic clip ensuring that both sides of the bag are parallel (fig. Note: The bag may be washed in luke warm water and dried completely. It should not be washed in washing machine (fig. Close the cover by pressing down until it clicks (fig. 23). REPLACING THE FILTERS The dustbag must be replaced if the window of the dustbag full indicator is completely red when the cleaner is operating at maximum power and the nozzle is raised from the floor. [. . . ] Recycling the Appliance at the end of its life: The plastic components all carry a material identification marking so that, like the other materials, they can recycled at the end of the life of the appliance. Please inquire with your local authority. [. . . ]