User manual PROGRESS PROFI 3000

[. . . ] ­ the housing shows visible signs of damage. · Avoid running over the mains lead with the appliance or the vacuum brush. · The cover cannot be closed unless a paper filter has been inserted. · Always ensure that a paper filter as well as a MICROFILTER and a HEPA filter are inserted. [. . . ] · Toner dust from laser printers and copiers must not be vacuumed using normal household vacuum cleaners. · This is a domestic vacuum cleaner and should only be used to vacuum dry dust. People and animals must not be vacuumed using the appliance. Keep children away from electrical appliances. · The manufacturer is not liable for any damage caused by incorrect use or operation. · Leave wet shampooed carpets to dry completely. Otherwise the vacuum cleaner will be damaged. Such action might also reduce protection against electric shock. · Do not vacuum matches, glowing ashes or cigarette ends using the appliance. Avoid picking up hard, pointed objects as these may damage the appliance or the paper filter. · Do not expose the appliance to the effects of the weather, humidity or sources of heat. The cover cannot be closed unless a paper filter has been inserted. Changing the microfilter We recommend replacing the microfilter at each fifth paper filter replacement, and at the latest when there is a clean dust bag and the dust level indicator is completely red with the nozzle raised. Cleaning As required, wipe the housing and the paper filter compartment with a damp cloth. Do not use any scourers or any solvents. Occasionally vacuum the floor nozzle and brush-heads with the crevice nozzle. Paper filter Progress P60 Carrying and Storage Open the lid and fold up. Remove the used microfilter by means of the clean hygienic tabs (figure) and dispose of it with the household waste. Insert the new microfilter and close the cassette. To make the appliance easier to store and carry, slide the floor nozzle into the tool rail. HEPA filter A highly effective special filter belonging to Class "S". This filter offers relief and assistance to allergy sufferers. The HEPA filter should be replaced after one year. HEPA filter ­ further supplies available from Progress customer service. Parking System For storing the suction pipe and nozzle during short pauses in vacuuming. The bracket on the nozzle is slid into the parking rail on the appliance. 15 What do I do, if . . . . . . it is difficult to push the nozzle Reduce the power setting on the appliance. [. . . ] The bracket on the nozzle is slid into the parking rail on the appliance. 15 What do I do, if . . . . . . it is difficult to push the nozzle Reduce the power setting on the appliance. This will not reduce cleaning efficiency. the motor thermal cut-out is activated If the motor is overloaded, e. g. [. . . ]