User manual PURE EVOKE-1

[. . . ] Safety instructions Keep the radio away from heat sources. Avoid objects or liquids getting into the radio. Do not remove screws from or open the radio casing. Unplug the power adapter from the wall if the radio will not be used for a long period. Copyright Copyright 2003 by Imagination Technologies Limited. [. . . ] Stop when you find the station to which you want to listen. 2. Push and release the Tune knob to listen to the station you have selected. The display may show `Now tuning. . . ' briefly as it finds the new station. If a station has one or more secondary services available the display will show `>>' next to the station name on the station list and they will appear next to the primary service as you turn the Tune knob. A secondary service will display `<<` before the station name on the station list indicating that it belongs to the primary service next to it in the list. See page 14 for information on primary and secondary services. If the station has `?' before its name the service is currently inactive or invalid. Press and hold down a numbered button for around two seconds to store the station under that number. `Preset 1 saved' when the station has been successfully saved. Once you save a station to a preset, the station name has the preset number next to it on the station list. To recall a previously stored station Press and release the numbered button under which you stored the station. If the selected preset is empty the display shows `Preset empty' for a few seconds and you continue listening to the currently selected station. 10 Advanced setup options EVOKE-1 has a number of advanced features which enable you to change the order and number of stations on the station list, use a tuning aid, apply Dynamic Range Control (DRC) and view the software version. Press the Setup button to enter the advanced setup menu, turn the Tune knob to scroll through the following menu options and push to select that option. Station Order This option enables you to choose the order in which stations appear as you scroll through the station list. When you select this option you see the currently selected order on the top row of the display and a scroll list on the bottom. Turn the Tune knob to scroll through the following options and push to select one: Alphanumeric Fav station Displays all stations in alphanumeric order. This is the default setting. Active station Displays the six most listened to stations at the top of the station list in alphanumeric order and the rest below in alphanumeric order. Your favourite stations will be displayed with a next to the station name when you scroll through the station list. Displays active stations at the top of the service list in alphanumeric order and inactive ones at the bottom in alphanumeric order. See Selecting a station on page 9 for information on active stations. Trim station list presets Removes inactive stations from the station list. See Selecting a station on page 9 for information on active stations. Available only when Fav station order (above) has been selected. Transfers your six favourite stations to the preset buttons. See page 10 for information on using presets. 11 Tuning aid This option provides a signal level display which you can use to find the best position for your radio and aerial. When you select this option, the bottom line of the display shows the channel identifier and frequency. See page 15 for useful addresses which you can contact to find the channel identifier for a multiplex you want to receive. 1. Turn the Tune knob to scroll through different channels and push the Tune knob to select one. Note The list includes all channels, UK stations are in the range 11B to 12D. The empty block indicates the minimum required level for reception and the solid blocks indicate the current level. 2. [. . . ] Use the tuning aid to fine tune the aerial placement, see page 12. 2. TV/FM Aerial If you have an externally mounted TV or FM aerial it may provide a stronger signal than an indoor aerial but as they are not tuned for the digital radio frequency range and are pointed at your local TV/FM transmitter, reception may be no better. The standard TV or FM RF connector cannot be plugged into your EVOKE-1 directly, you will need to use an RF to F-type adapter. You may also find that you need to use a signal booster if you want to use the aerial for both TV or FM and DAB reception. 3. [. . . ]