User manual PYLE PDCDTP100

[. . . ] When not using the player for an extended period of time be sure to disconnect the plug from the receptacle. Carefully handling the compact disc Always keep the disc clean; do not use cracked or wrapped discs, it will damage the player. 1. 2 IMPORTANT SAFETY INSTRUCTION · · · · Read and follow all instructions and heed all warnings. Do not block any of the ventilation openings. [. . . ] The unit will be in the "stop" mode if you continue to press the button for more than 3 seconds CONT. /SINGLE BUTTON ( OUTRO) To press this button it can switch between auto cue single and continue. The selected mode is indicated on the display. *AUTO CUE SINGLE-After each track, the unit pauses at the beginning of next track. *OUTRO-Press the button for 3 seconds for OUTRO function, the unit will play the last 30 seconds of each track. EJECT Button Press to eject the disc TRACK SKIP BUTTON This button selects the track to be played BOP BUTTON The playback will automatically play from the CUE point upon the button is pressed. CUE BUTTON The cue function allows the CD to be played from the memorized point any number of times. With the unit in the pause mode, pressing the CUE button to set up the memorized cue point and then the cue button blinks. PLAY/ PAUSE BUTTON Each press of this button causes the operation to change between PLAY and PAUSE modes. 2. 3. 6. 7. 4 L. C. D These liquid crystal display (L. C. D. ) indicate the track numbers, time (minute, second, frame), remain, pitch, beat, loop, auto cue single, continue and time bar. +10 BUTTON Pressed the button to forward 10 tracks. If you forward 10 tracks, and the tracks over total tracks, the unit will jump to track 1. PITCH RANGE SELECT To select 8 % will assign +/-8 % (Red LED light up) to pitch control slider and so does 16% (Yellow LED light up). PITCH BEND + / - BUTTON When CD player is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been adjusted. The pitch will automatically rise up to + 16% from the current setting while pressing the " + "button. While pressing the " ­ " button, the pitch will automatically drop to - 16 % from current setting. By the way of changing the pitch the position of the beats can be matched. BPM BUTTON To get the BPM number manually. SEARCH BUTTON Pressing the button for quick forward or backward 20. PITCH CONTROL SLIDER To match the choices of playback speed (8%, 16%), you can choose what range you want between minimum (up side) and maximum (bottom side) by moving the pitch control slider. SLEEP: Leave the unit unused for 30 minutes; the machine will shut off automatically. 8. 5 CONNECTION Function of the Rear Unit : 1. The audio from CD player is output from these jacks. [. . . ] *Press the PLAY/PAUSE button to start the playback. * Press the EJECT button to eject the disc. 2. Track skip Use the TRACK SKIP control to advance ( ) or reverse ( ) to a desired track. 3. SEARCH CONTROL * JOG DIAL In pause mode, dial the jog, the playback will move by frame or frames depending on the speed you dial. [. . . ]