User manual PYLE PDCDTP500 Instruction Manual

[. . . ] To avoid placing on un-stable location Select a level and stable location to avoid vibration. Do not use chemicals or volatile liquids for cleaning Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt. If out of work, contact sales agency immediately Any troubles arose, remove the power plug soon, and contact with an engineer for repairing, do not open the cabinet by yourself, it might result a danger of electric shock. Take care with the power cable Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug. [. . . ] SEAMLESS LOOP ( 2 set) There are A, B/LOOP/EXIT, RELOOP buttons. 1 A "start point" (A point) 2 B/LOOP "end point" (B point) Press B/LOOP/EXIT to set end point (B point) and start loop playback automatically. 3 EXIT To exit the loop playback, Press B/LOOP/EXIT to exit the loop playback. 4 Return RELOOP: Return to the loop playback by pressing RELOOP. 5 Change "START POINT" & "END POINT" by pressing A & B/LOOP/EXIT in play mode. 6 The interval between A and B point must be more than 20 frames, or the B point will be canceled, then Loop function disappear, and LOOP fades on the LCD. JOG WHEEL This contains various functions, as follows: *Speed Control Rotating the wheel, in play mode, will change the playback speed accordingly. While rotating clockwise, the playing speed increase; rotating counterclockwise, the speed decrease. *Searching Rotating the wheel in pause mode, the player will forward or backward to the desired point to start. The searching speed changed according to the dialing speed. It can be carried out by one frame increment. RELAY Press the "RELAY" button to activate. When one unit is in play mode, and the other unit is in "pause" mode; pause the playing unit, the other unit will automatically start to play. PROGRAM BUTTON You can program the track you want. While the unit is stopped, pressing the PROG button first to enter memorized mode, by pressing the skip buttons to select the tracks you want to order and then press the PROG button again to compete set up per track. The max tracks you can program are 30 tracks. While playing programmed tracks, the LED of PROG lights up. While the unit is stopped, eject disc or turn off the power, the program will be exited. PITCH BUTTON With unit on the PITCH ON mode, to select the pitch range from 8%, 16%, which the LED indicator light up. With the unit on the PITCH OFF mode, it means playback speed is normal (0%). [. . . ] * SEARCH BUTTON Press the SERCH button in play mode to move by minute. While, in pause mode, the SEARCH button activated, the search control moves by minute. PITCH CONTROL KNOB * JOG DIAL In play mode rotate the job clockwise to speed up; rotate counterclockwise to slow down. * PITCH CONTROL KNOB Move the knob toward +16 direction, the playback become fast; move it toward -16 directions, the playback become slow. TROUBLESHOOTING Symptom When playback is started, stops or pauses immediately. [. . . ]