User manual PYLE PDSP850

[. . . ] It contains a rang of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product. FEATURES AND CONTROLS FRONT PANEL REAR PANEL PHONO/LINE 1, OFF, & LINE 2 Source Selection Switch Let you select the input source goes through the PDSP850 to the output units. SAMPLER LEVEL Control Lets you adjust the output volume of the recorded sample. [. . . ] In 1/2-BANK mode, you can choose either 1 BANK or 2 BANKS for recording, and in 3-BANK mode you can store the samples to all of 3 BANKS individually. A. 1/2-BANK MODE The recording time in this mode are: 1 BANK for 24 seconds (1-BANK MODE USE ONLY, IF THIS BANK IS STORED) 1 BANK for 8 seconds (LINKING WITH THE 2ND BANK OF 16 SECONDS FOR 2-BANK MODE USE) 1 BANK for 16 seconds (LINKING WITH THE 2ND BANK OF 8 SECONDS FOR 2-BANK MODE USE) The 24 seconds bank is the longest recording time in PDSP850, you can not use the other banks to store the different samples in this mode, if this bank is stored. The 8 and 16 banks are separate and can be linked, you can store a different sample in these two banks, but they must be recorded individually and they must be played one at a time. B. 3-BANK MODE The recording time in this mode are: 1 BANK for 4 seconds 1 BANK for 8 seconds 1 BANK for 12 seconds These banks are separate and can be linked, you can store a different sample in these three banks, but they must be recorded individually and they must be played one at a time. 2. The SAMPLER MODE(WRITE/SINGLE/REPEAT) and START/STOP (RECORDING) A. Select the source you want to sample by placing the input source selector (PHONO/LINE 1 & LINE 2) or the SAMPLER MIC button (see "Using the SAMPLER MIC switch" in OPERATION). NOTE:The SAMPLER MIC must be in OFF mode, if making sample from the PHONO/LINE or LINE 2 source. B. Select the BANK MODE and MEMORY BANK you want to record by placing the bank mode selector (1/2 BANK & 3 BANK) and pressing the proper MEMORY BANK (4, 8, 12, 16, or 24) button (the LED indicator will be illuminated). C. TO RECORD - WRITE Set the SAMPLER MODE switch to WRITE position (the LED will be illuminated) and press the START/STOP button (the LED will be RED illuminated) to begin the recording. Pressing the START/STOP button again, to stop the recording (the LED will be turned off). If you do not press stop, it will automatically stop after the selected MEMORY BANK TIME (4, 8, 12, 16, or 24 seconds) is up. D. TO PLAYBACK - SINGLE Set the SAMPLER MODE switch to SINGLE position (the LED will be illuminated) and press the START/STOP button (the LED will be GREEN illuminated) to playback the sampler one time. Every time you press the START/STOP button, the unit will replay the recorded sample from the beginning and play it through the end of recorded sound. Rapid, consecutive pressing of the START/STOP button will create an interesting stuttering effect. E. TO PLAYBACK - REPEAT Set the SAMPLER MODE switch to REPEAT position (the LED will be illuminated) and press the START/STOP button (the LED will be GREEN illuminated) to playback the sampler all the way through, and then repeat it until you press the START/STOP button to stop. Connecting The LINE OUTPUT The PDSP850 has been designed to provide output to a power amplifier or sound processor (mixer). 2. Connecting MIC Input connection using 1/4" jack Amplifier or Signal Processor Connecting The REC OUTPUT The PDSP850 has been designed to serve as an audio source for tape recording. Microphone CD Player or VCR Tuner 3. Using the SAMPLER MIC switch To make the sample from the microphone, push the SAMPLER MIC button (the LED indicator will be illuminated). [. . . ] When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to: R. A. #: _____________ PYLE PRO Service Center 1600 63rd Street Brooklyn, NY 11204 You must also include the following items with your return: · A copy of your sales receipt or other proof of purchase · A brief letter, indicating the problem you are experiencing with the product · Include in your letter your return address, daytime phone number and R. A. number · Also include a check or money order for $15. 00 for return shipping, handling and insurance, or provide your Visa/MC number with expiration date. Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. [. . . ]