Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PYLE PINV2. We hope that this PYLE PINV2 user guide will be useful to you.
Lastmanuals help download the user guide PYLE PINV2.
Detailed instructions for use are in the User's Guide.
[. . . ] · Do not insert foreign objects into this inverter's AC outlets. · Do not leave this inverter or any device operating unattended, to avoid property damage potentially. · Do not use or place this inverter near flammable materials or any places, which accumulate flammable fumes. [. . . ] Cut the lighter plug off the PINV2 / PINV3 power cord. Turn off the power switch and be sure no flammable fumes are present. Connect the BLACK cable to the black post (-) and RED cable to the red post (+) on the rear of the PINV2/PINV3. Then connect the BLACK battery chip to the NEGATIVE (-) terminal and RED battery chip to the POSITIVE (+) terminal of the battery. The reverse polarity connection will result in a blown fuse and may cause permanent damage to the inverter. Do not use the system with positive electrical grounding. Be sure to fasten all connections between battery chips and terminals.
3
-The LED indicators
A. GREEN : It indicates the inverter is power on, the cooling fan (PINV2 / PINV3) is also activated, and AC power will be delivered to the AC outlet. RED : It indicates the inverter shutdown caused by low voltage, overload, or excessive temperature.
-The ON/OFF switch
It enables output AC power at the AC outlet when switched ON. It also acts as a manual reset for overload, low battery voltage and overheat fault conditions. Reset occurs by switching OFF for 5 seconds after automatic shout down then back ON again. This manual reset feature prevents unexpected or hazardous restarting of connected AC loads.
-The AC outlet
Single and dual AC outlets are provided on one end of the PINV1, PINV2 and PINV3, make sure of the power consumption required before plug in: A. When operated from a vehicle cigarette lighter (PINV1/PINV2/PINV3) A consumption of 150 Watts or less for PINV1, and any combination of 115 Volt AC products with a total power consumption of 150 Watts or less for PINV2 / PINV3. When operated from the directly connection to a 12 Volt battery (PINV2 / PINV3) Any combination of 115 Volt AC products with a total power consumption of 300 Watts or less for PINV2 / PINV3
CAUTION:
· Do not connect to AC DISTRIBUTION WIRING. [. . . ] Turn off the inverter and allow to cool for 15 minutes. Clear blocked fan (PINV2 / PINV3) or remove the objects covering the ventilation.
SYMPTOM B: NO AC POWER OUTPUT, NO LED LIGHTS ARE ON.
POSSIBLE CAUSES The lighter socket or 12 Volt outlet has been poor contacted The lighter socket or 12 Volt may require ignition to be on. The fuse of cigarette lighter or 12 Volt outlet is blown The fuse of inverter is blown SUGGESTION Press plug into socket firmly. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PYLE PINV2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PYLE PINV2 will begin.
