User manual PYLE PLCD41MP

[. . . ] Be careful not to drop or shock the unit strongly, it may break or crack because it contain glass parts. To prevent damage to the machine, take the following precautions: Be sure the unit is connected to a 12V DC power with a Negative Ground The unit is only designed for use with 4 speakers. Do not combine output for use with 2 speakers. [. . . ] (If mode with AUX IN, the function is below: press MD(MODE)to select: 1 If with DISC, press MD that is: Press [ Minute ] button to set the hour. ] button to set the minute. Press [ Quit clock set mode It will quit clock set mode If there is no operation in 5 seconds. AUX IN AUX IN RADIO RADIO DISC AUX IN 2 If without DISC, press MD that is: Dsp Short press this button to DSP Press LOUD button once, ROCK will bicker on display. Press LOUD button twice, POP will bicker on display. Press LOUD button third, CLASS will bicker on display. AUX IN Band(Loud) DSP LOUD Long press the [BD/LD]button to emphasize the bass output, Long press it again to resume the normal listening. Release press the " " button to release faceplate. Clock Short press CLK can display time even power off . Long Press CLK for 3 seconds will enter set mode. 6 Speaker mode VOLUME BASS TREBLE SELECT PWR VOL SEL SEEK SCN RPT SHF BAND CLOCK MODE FADER BALANCE VOLUME DSP DSP 1 2 3 4 5 6 SHF SCAN PLAY/PAUSE REPEAT In press mode, VOL is sel function Volume set mode Treble set mode Press SEL button once, display shows VOL then rotate the volume + button to adjust volume level up. rotate the volume - button to VOL adjust volume level down. SEL VO L- , VO L+ Press SEL button third, TRE 5 display shows TRE , then rotate the volume + button to adjust treble level up. Rotate the volume - button to adjust treble level down. Balance set mode Press VOL 10 PR ES S Bass set mode BAL 4 Press SEL button twice, display shows BAS , then rotate the volume + button to adjust bass level up. rotate the volume - button to adjust bass level down. SEL button fourth display shows BAL , then rotate the volume + button to adjust right speaks level . Rotate the volume - button to adjust left speaks level . Fader set mode BAS -6 Press SEL button fifth, display shows FAD , then rotate the volume + button to adjust rear speaks level. Rotate the volume - buttonto adjust front speaks level. FAD -3 7 Play/pause Pause Shf Press [SHF]button If with DISC in unit, Press the [ Play ]to pause music. Press the [ ]button again , then come back to DISC playing. Press [SHUF] button to play all the track in random order. SHF and playing song number will appear on the LCD. Press [SHUF]again will stop random playing. Scan Press [SCN]button Press this button once for TRACK INTRODUCTION. The first 10 seconds of each track on the disc will play. [. . . ] Press / select desired directory, then press confirmed playing. ABC YZ9 ENTER Exter nal view . . . . . . . . Number of items Exter nal view . . . . . . . . [. . . ]