User manual PYLE PLCD55

[. . . ] LCD DIGITAL DISPLAY The unit utilizes a digital type display which shows numerical indication of station FREQUENCY and other FUNCTIONS. 6. DISPLAY CONTROL / DANCING SPECTRUM MODE SELECTION This button serves to show available information as following: - Time - Track No. / Playing Time (during CD and MP3 mode) - Directory Name / File Name (during MP3 mode and the file must contain directories or files name written by the CD writer) Page. 2 P / N : 570-F88902-01 SETTING CLOCK TIME MANUALLY Briefly press "DISP" button until clock time appear on the display. [. . . ] STEREO/MONO CONTROL Press this button to select "STEREO" or "MONO" reception. 12. LOUD CONTROL Press this button to activate the loudness circuitry which compensates for loss of high and low frequencies during low volume levels. 13. LOCAL/DISTANT SELECTOR Press this button to prevent strong local stations from overlapping weaker stations. For normal operation, press this button again for distance. 14. VOLUME/SELECTION CONTROL Rotate the button anti-clockwise to decrease, or clockwise to increase volume level. AUDIO LEVEL CONTROL (WHEN PUSHING ONE AFTER ANOTHER) Press this button shortly one after another to show VOL/BAS/TRE/BAL/FAD control. VOLUME - Press this button once, then rotate anticlockwise to decrease, or clockwise to increase volume level. BASS - Press this button once, then rotate anticlockwise to decrease, or clockwise to increase bass level. TREBLE - Press this button once, then rotate anticlockwise to decrease, or clockwise to increase treble level. BALANCE - Press this button once, then rotate anticlockwise or clockwise to level balance of speaker right and left. FADER - Press this button once, then rotate anticlockwise or clockwise to level fader of speaker front and rear. AUDIO / SETTING SELECT (WHEN PUSHING 2 SECONDS) When pressing the button for more than 2 seconds, it activates as unit setting selection in cyclical mode as following. The unit setting can be changed byrotating the button clockwise or anti-clockwise. If "ERROR" is shown, it is suggested to reset the radio by presssing the reset button. PLAY ON MP3 SONG · Insert the media with MP3 song in the disc slot. The unit will start playing and checks all the files and folder on the media. · If MP3 files and directories are recognized, the media will start playing. · The MP3 files and directories are accessed according to the order written by the CD writer. TRACK SEARCH · Press "AMS" button once and "Track srch" will be shown on the display. · Press "VOL/SEL" control to enter track search mode and "Track 001" will appear on the display for you to enter track number. · Rotate "VOL/SEL" control clockwise or anti-clockwise to shift number 0 ­ 9 in loop rotation. · Press "VOL/SEL" control shortly to select the first digit. · Repeat the same procedure to enter the other digits if required. · After the track number is selected, press "VOL/SEL" control more than 2 seconds to start playing the selected track. · If track number is not entered within 10 seconds, the unit will continue playing the current file. FILES SEARCH · Press "AMS" button twice and "File srch" will be shown on the display. · Press "VOL/SEL" control to enter file search mode. [. . . ] Remark : 1) The media must contain directories or files name written by the CD writer in order to use in searching. 2) If only partial letters are entered for searching either in directories or files name, you may not get it correctly. WIRE CONNECTION CAUTION : Do not connect the speaker wires to chassis or car body. Each speaker wire cannot be soldered together with other wires. Otherwise, the unit will be damaged and no sound will come out anymore. RESET FUNCTION The RESET button is located in front of the panel. [. . . ]