User manual PYLE PLCD69

[. . . ] DIN FRONT/REAR-MOUNT This unit can be properly installed either from "Front" (conventional DIN Frontmount) or "Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods. 3 (Fig. 6. Dashboard Nut (5mm) Spring washer Screw (5 x 25mm) Screw Strap Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle. [. . . ] - Program Scanning Press AMS button (18) shortly to scan the preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with releasing mute, then searches again. · STATION STORING Press any one of the preset buttons (14) (M1 to M6) to select a station which had been stored in the memory. Press this button for several seconds, current station is stored into the number button. · STATION SELECTION Press MANU/SKIP button (16) or MANU/SKIP button (17) shortly to activate automatic seek function. Press for several seconds until "MANUAL" appeared on the display, the manual tuning mode is selected. If both buttons have not pressed for several seconds, they will return to seek tuning mode and "AUTO" appeared on the display. · LOCAL/DISTANCE Press LOC button (3) to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. · MONO/STEREO Press MON button (1) to select mono or stereo mode. You can sometimes improve reception of distant stations by selecting mono operation. · SCAN Press SCN button (24) to set function to scan mode, which scanning to higher frequency station with receivable signal and keep on each station for several seconds. 9 OPERATION CD OPERATION · CD OPEN/CLOSE/EJECT When the front panel is in State 2 and the unit is on, press (eject) button (4), the panel will change into State 3 and display the disc slot (5). Then insert a disc into the slot, the panel will automatically turn up. Press (eject) button (4) again to eject the disc. And after about 10 seconds, the panel will turn up. · SELECT TRACKS Press MANU/SKIP button (16) or MANU/SKIP button (17) to move to the previous track or the following track. Hold MANU/SKIP button (16) or MANU/SKIP button (17) to fast reverse or fast forward. CD play starts from when you release the button. · PAUSE PLAYING Press PAU button (19) to pause CD player. · REPEAT THE SAME TRACK Press RPT button (21) to continuously repeat the same track. · PREVIEW ALL TRACKS Press SCN button (20) to play first several seconds of each track on the current disc. Press again to stop intro and listen to track. · PLAY ALL TRACKS IN RANDOM Press SHF button (22) to play all tracks on CD in random order. Press again to cancel the function. 10 OPERATION REMOTE CONTROL HANDSET 1 7 4 3 8 6 13 12 11 15 9 5 2 10 14 FUNCTION KEYS & CONTROL 1. [. . . ] Leave the player off for an hour or so, then try again. Adjust the installation angle to less than 30 degrees. Clean the compact disc, then try to play a new one. No sound. Volume is in minimum. Wiring is not properly connected. Sound skips. The installation angle is more than 30 degrees. [. . . ]