Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PYLE PLDCP50. We hope that this PYLE PLDCP50 user guide will be useful to you.
Lastmanuals help download the user guide PYLE PLDCP50.
Detailed instructions for use are in the User's Guide.
[. . . ] Model:
PLDCP50
50F Hybrid Super Cap (carbon and electronic capacitor) With Blue Digital DC Voltage and Amperage Display, Blue LEDS In Front
INSTALLATION AND MOUNTING:
You must first attach the mounting tabs to the capacitor before mounting it. Use the supplied hardware shown in the picture to the right. [. . . ] If the capacitor is connected incorrectly by reversing the positive and negative wires during the installation process the PCB will issue a 45 second noise to warn you. d) Hi-end platinum plated 100% brass solid parts and chrome plated metal cover e) Blue flash LED line on the front side of HYBRID SUPER CAPACITOR. The LED's chase to power discharge. f) Over voltage limit and low battery voltage limit warning. When the system voltage peaks over 17. 5 DCV or LESS than 10 DCV. The buzzer on the PCB will issue an audible noise warning. g) Multiple small capacitance capacitors linked to provide the lowest inner E. S. R. a)
CHARGING THE CAPACITOR AND WIRING:
The capacitor must be charged before connecting the Power and Ground cables to the capacitor. Failure to charge the capacitor will result in a large spark generated from the rapid inflow of current.
1
2
To Charge the capacitor: 1. Make Capacitor positive terminal connections with amplifier and tighten the bolt. Caution: Stripped terminals are not covered under the capacitor's warranty. Connect the ground cable with battery, amplifier, then refer to the attached drawing. [. . . ] And connect the positive cable of the battery directly to the positive terminal on the capacitor.
Multiple Capacitor Wiring Diagram:
DISCHARGING THE CAPACITOR:
WHEN YOU WANT TO MOVE THE CAPACITOR FROM ORIGINAL INSTALLED CAR AUDIO SYSTEM, YOU MUST FIRST FOLLOW DISCHARGING PROCESS AFTER TAKING OUT THE CAPACITOR FROM THE CAR AUDIO SYSTEM.
LIMITED WARRANTY
One Year Warranty from the date of purchase.
WARNING!!
THIS POWER CAPACITOR MAY EXPLODE AND CAUSE SERIOUS INJURY IF ABUSED OR CONNECTED IMPROPERLY. PLEASE REFER TO THE INSTRUCTIONS CONTAINED IN THIS MANUAL FOR CORRECT MOUNTING, CHARGING/DISCHARGING AND WIRING CONNECTION FOR THIS CAPAPCITOR PRIOR TO INSTALLATION.
To Discharge the capacitor: With battery power disconnected, place the light bulb or resistor across the capacitor's positive and negative terminals until light goes out or for three minutes if using a resistor.
3 4 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PYLE PLDCP50
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PYLE PLDCP50 will begin.
