User manual PYLE PLVW1048VGA

[. . . ] Installation Step 1: Attention: It's directional for the iron slice. Instruction to fix the screw of the iron slice Instruction to fix the screw of the monitor Screw hole 4 mm Step 2: Install the monitor on the roof. Car roof Iron slice Car roof Mounting plate Step 3: Fix the monitor on the iron slice with the screws. See step 1 Completed 3. OSD function VIDEO control keys 1 23456 dome lights ON/OFF 1. Power When you push this button, it will Power ON or OFF the LCD. [. . . ] Mute: You could mute the audio with this button. 2. Content of OSD Function OSD Adjustment for PC function Press "MENU" Button display will show following picture. BIOS VERSION PIP Enable Auto Tune Brightness Contrast Color Quality Position Mute FM Default Save Exit Display Bios Version 800X600 H:37. 6KHz V:59. 7Hz PC Display Mode PC Input Frequency Continue to press "UP" & "DOWN" buttons and select above functions. Then, use "Menu" button to enter these functions and adjust them to your personal preference. PIP ENABLE : Set position ; see 4. 1 AUTO TUNE : See 4. 2 BRIGHTNESS : See 4. 3 CONTRAST : See 4. 4 COLOR : See 4. 5 QUALITY : See 4. 6 POSITION : See 4. 7 MUTE : See 4. 8 FM : See 4. 9 DEFAULT : Set default value . See 4. 10 SAVE EXIT : Save all of adjustment & exit to OSD function. 4. 1 PIP CHANNEL SELECT( Under PC Mode ) VIDEO 1 VIDEO 2 PIP OFF RETURN VIDEO 1: Set VIDEO 1 Input VIDEO 2: Set VIDEO 2 Input PIP OFF : exit PIP function. 4. 2 AUTOTUNE( Under PC Mode ) AUTOTUNE Press "MENU" to enter Press "MENU" to enter. DOING AUTOTUNE : Auto tracking , positioning, phase and size (press "MENU" to enter this adjustment. It takes 5 second to finish this adjustment. ) 4. 3 BRIHTNESS BRIGHTNESS 0 63 BRIGHTNESS: Adjust LCD brightness level 0~63 of the image 4. 4 CONTRAST CONTRAST 0 63 CONTRAST: Adjust white color level 0~63 of the image. 4. 5 COLOR 9300 7500 6550 USER RETURN 9300K : Set color to 9300K Use "MENU" to enter 7500K : Set color to 7500K Use "MENU" to enter 6550K : Set color to 6550K Use "MENU" to enter USER : Set color by user Use "MENU" to enter EXIT : Back to new setting 4. 6 QUALITY SIZE PHASE TEST/GFX SHARPNESS RETURN SIZE : Adjust size of the image. PHASE : Adjust phase level 0~63 of the image. TEXT/ GFX: DOS MODE/ change Text 720x400 & Gfx 640x400. SHARPNESS : Adjust Sharpness level 0~15 of the image. RETURN: Back to new setting 4. 7 POSITION IMAGE POS OSD POS SPEED EN SPEED ADJ RETURN H:37. 6KHz V:59. 7Hz IMAGE POS : Adjust UP/ DOWN/ HOR/VER position of the image. OSD POS : Adjust OSD UP/ DOWN/ HOR/VER position of the image. SPEED EN : Select open or exit OSD speed. RETURN : Back to new setting. 4. 8 MUTE MuteOff MuteOn H:37. 6KHz V:59. 7Hz Mute On : 4. 9 FM BIOS VERSION FM88. 0MHZ FM88. 1MHZ FM88. 2MHZ FM88. 3MHZ FM88. 4MHZ FM88. 5MHZ FM88. 6MHZ FM88. 7MHZ FM88. 8MHZ FM88. 9MHZ Return 800X600 H:37. 6KHz V:59. 7Hz RETURN : Back to new setting 4. 10 DEFAULT DEFAULT YES NO 5 OSD Adjustment for VIDEO function Press "MENU" Button display will show following picture. BIOS VERSION Brightness Mute FM PIC Mode Contrast Saturation Hue Default Save Exit Display Bios Version TV NTSC H:15. 7KHz V:59. 7Hz Video System Video Input Frequency BRIGHTNESS : See 5. 1 Mute : See 5. 2 FM : See 5. 3 PIC MODE : See 5. 4 CONTRAST : See 5. 5 SATURATION : See 5. 6 HUE : See 5. 7 DEFAULT : Set default value. [. . . ] Please do not use and store in the high Temperature. (Storage 5~48 , Operating 5~39 ) If you 7. When you connect cable, please make sure Anode (Positive) and Cathode (Negative) is correct. [. . . ]